Listen To Radio; Tune To A Radio Station; Program Radio Stations Automatically; Program Radio Stations Manually - Philips FWM387/12 User Manual

7 Listen to radio

Tune to a radio station

1
Press TUN repeatedly to select FM or
MW.
2
Press and hold
seconds.
[SEARCH] (search) is displayed.
»
The radio tunes to a station with
»
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
/ repeatedly until you fi nd optimal
reception.
Program radio stations
automatically
You can program a maximum of 40 preset
radio stations.
1
In the tuner mode, press and hold PROG
for more than 2 seconds to activate
automatic program mode.
[AUTO] (auto) is displayed.
»
All available stations are programmed
»
in the order of waveband reception
strength.
The fi rst programmed radio station is
»
broadcast automatically.
Program radio stations
manually
You can program a maximum of 40 preset
radio stations.
1
Tune to a radio station. (see 'Tune to a
radio station' on page 17 )
/ for more than 2
2
Press PROG to activate program mode.
[PROG] (program) blinks on the
»
display.
3
Press ALB/PRESET+/- to allocate a
number to this radio station, then press
PROG to confi rm.
The preset number and the frequency
»
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Tip
•
To overwrite a programmed station, store another
station in its place.

Select a preset radio station

1
In tuner mode, press ALB/PRESET+/- to
select a preset number.
Tip
•
Position the antenna as far as possible from TV, VCR
or other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.

FM stations with RDS

Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
"RDS" is displayed.
Display RDS information
1
For a FM station with RDS, press RDS
repeatedly to display various broadcast
information.
EN
17