Lennox BCE3M*C SERIES Installation Instructions Manual page 6

Right-Hand Air Discharge
For horizontal right-hand air discharge, the following field
modifications are required.
1. Remove and set aside blower and coil access panels.
2. Remove brackets securing pan to unit. See figure 4.
3. Remove coil assembly, bottom drain pan and
horizontal drain pan as one unit from the air handler.
See figure 5.
4. Remove the blow-off prevention brackets, top cap and
drip pan between slabs. Move the horizontal drain pan
to the opposite side of the coil. See figure 6.
NOTE: The 1.5- and 2-ton units do not have or require
blow-off prevention brackets or drip pan.
Page 6 of 23
Figure 4
Issue 1720
Figure 5
Figure 6
507621-01