Table of Contents
Advertisement
Apply the self adhesive cable clip ITEM 3 as shown in the diagram.
6
Route cable as shown below. Replace side extrusion and rear end cap.
The installation is now complete. Replug the console and test for correct operation.
ASSEMBLY (ARMREST POSITION)
To assemble the Meterbridge in the armrest position the Front Panel/PCB assembly ITEM 5 must be removed
2
from the extrusion ITEM 7 and replaced the opposite way round.
When replaced the self adhesive Facia ITEM 4 can be applied to the front panel ITEM 5
1
3
ensuring correct alignment with the meter slots.
ALLEN & HEATH
1 4
S1SM1
Hide quick links:
Advertisement
Table of Contents
