System Requirements; Product Setup; Hardware Setup - D-Link DSL-3782 Quick Installation Manual

SYSTEM REQUIREMENTS

• ADSL/VDSL Internet service
• Computer with:
• Microsoft Windows
• Internet Explorer 8, Edge 25, Firefox 20, Safari 4, or Chrome 17 or higher version with Java
installed and enabled

PRODUCT SETUP

HARDWARE SETUP

DSL-3782
DSL-3782
Power DSL-3782
PC
Power DSL-3782
4
®
10/8/7/Vista/XP SP3 or Mac with OS X 10.7 or higher
Step 1
Position your DSL-3782 near your PC and a telephone wall jack
which provides DSL service. Keep the modem router in an open
area for better wireless coverage.
PC
Phone
Step 2
Plug one end of the supplied DSL phone cable into the DSL port on
the back of the modem router, and the other end into the telephone
wall jack.
PC
Phone
Step 3
Connect the supplied power adapter to the modem router and a
power outlet, and press the power button. The device LEDs will light
up. Wait approximately one minute before going on to step 4.
PC
Step 4
Plug one end of the supplied Ethernet cable into the port labeled
1 on the back of the modem router, and the other end into the
Ethernet port on your computer.
PC
If you are setting up the DSL-3782 using a laptop or mobile
device, connect it using the Wi-Fi network name and password
printed on the label attached to the back your router.
DSL-3782