Pairing And Connecting With A Computer (Windows 7) - Sony SRS-XB30 Help Manual

Help Guide
Wireless Speaker
SRS-XB30

Pairing and connecting with a computer (Windows 7)

Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly.
It is necessary to pair a device with the speaker to be able to make a BLUETOOTH connection for the first time. Perform same
procedures to pair to other devices.
Do the following before starting.
Make sure that your computer has the BLUETOOTH wireless function.
Place the speaker within 1 m (3 ft) of the computer.
Connect the speaker to an AC outlet or charge the battery sufficiently.
Locate the operating instructions supplied with the computer for reference.
Stop playback on the computer.
Turn down the volume of the computer and speaker to avoid any sudden loud sound output from the speaker.
Activate the BLUETOOTH function on your computer. For details how to activate the BLUETOOTH function or to confirm that
your computer has the BLUETOOTH function, refer to the operating instructions of the computer.
Set the computer speakers to ON mode. If the computer speakers are set to "Mute (OFF)" mode, sound will not be produced
by the BLUETOOTH speakers.
Computer speakers in "Mute (OFF)" mode
Computer speakers in ON mode
Turn on the speaker.
1
The (power) indicator lights up in white.
The (BLUETOOTH) indicator begins to flash in white.
When you turn on the speaker for the first time after purchase, the
in white and the speaker enters pairing mode automatically by just turning on the speaker. Proceed to step
When you turn on the speaker, the speaker tries to make a BLUETOOTH connection with the last connected
(BLUETOOTH) indicator will begin to flash quickly
.
39