Sony SRS-XB30 Help Manual page 44

Check that the
5
When the speaker is connected to the computer, the
from your computer.
If a connection cannot be made, despite [SRS-XB30] appearing on the screen, initiate pairing mode on the speaker.
Press and hold the
begins to flash quickly in white.
Hint
For details on operating your computer, refer to the operating instructions supplied with the computer.
If your computer does not have a BLUETOOTH wireless function, it will be necessary to connect a commercially available BLUETOOTH adaptor
to the computer.
Note
The pairing mode of the speaker is released after about 5 minutes and the
information is not stored in the speaker, such as at the factory settings, the pairing mode is not released. If the pairing mode is released before
finishing the process, repeat from step
Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
(BLUETOOTH) indicator has switched from flashing to a steady light.
(power) PAIRING button until you hear the voice guidance and the
.
(BLUETOOTH) indicator stays lit. You can enjoy playing back music
(BLUETOOTH) indicator flashes slowly. However, when pairing
(BLUETOOTH) indicator
37