Test Points For Tape; Path Adjustment - Sanyo VHR-VX400 Service Manual

2-2. CHECKING THE RF CHANNEL
If the TV and VCR are connected by an aerial output cable which has poor shielding characteristics, turn off the RF converter of
the VCR and use the VCR with an AV cable. To turn the RF converter off, input "00" when setting the RF (when "RF" is displayed)
during VCR pre-setting.
3. TEST POINTS FOR TAPE PATH ADJUSTMENT
Test points TP182 (ENV) andTP183 (SW-P) for tape path adjustment are shown in figure below.
For adjustment, refer to the separate volume "VC Mechanism Manual" (MM531 683).
PIB47000E
TP182 ~ ~TP183
o
TPIO1
--
0
0
C3016
(Parts side) II
o
IC301
CP-1 PWB Assembly (Foil side)
Fig. 3-1
—
–12–