Graco PR70 Instructions - Parts Manual page 47

Tank Assemblies
403
3
402
2
312394ZAC
406
1
405
1
1
Use glass cloth tape to secure ground strap, thermal switch, and RTD to tank wall
before adding heat blanket.
2
Secure heat blanket to tank with string laced through eyelets.
3
Insulation blanket should cover heat blanket completely. Secure insulation blanket to
tank with 2 in. wide velcro strap.
4
Apply thread sealant tape to male npt threads prior to installation.
5
The RTD sensor assembly (404) should always be connected to side one of the M8
splitter harness (407). Side one is on the female/female end of connector and is
marked with a molded imprint of the number "1".
408
407
5
401
404
4
ti12452a
Parts
5
47