Startup - Graco PR70 Instructions - Parts Manual

Startup

Startup
1. Locate power switch at rear of machine and turn
power on. The display module will automatically turn
on and begin to load.
2. Slide the system air pressure relief switch up. It is
the yellow tab located at the rear, left of the
machine. The hole in the tab should not be showing.
3. For systems with an Advanced Display Module:
if the machine is in Disabled Mode, press the Select
Operating Mode button (
Disabled mode and to select a new operating mode.
Press the Enter button (
operating mode.
F . 6: Advanced Display Module - Disabled Mode
IG
18
) repeatedly to exit
) to accept the new
312394ZAC