Page 3
Direct current (DC) 1.3 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered. The product and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not as directed.
Page 4
▶ Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. ▶ Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Page 5
Service ▶ Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 2.2 Additional safety precautions for screwdrivers Personal safety ▶ Only use the product if it is in perfect working order. ▶...
Page 9
The product described is a hand-held cordless drill / driver. It is designed to be used for driving and removing screws and for drilling in steel, wood and plastic. ▶ Use this product only with Hilti Liion batteries of the B18 / B22 series. ▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.
5 Operation 5.1 Inserting the battery CAUTION Risk of injury. The drill/driver may start inadvertently. ▶ Before fitting the battery, check that the drill/driver is switched off and that the switch safety lock is activated. CAUTION Electrical hazard. Dirty contacts may cause a short circuit. ▶...
Page 11
5.3 Fitting the accessory tool 1. Set the forward/reverse switch to the middle position or remove the battery from the power tool. 2. Check that the connection end of the accessory tool is clean. Clean the connection end if necessary. 3.
▶ Fit the belt hook. 6 Troubleshooting 6.1 Troubleshooting If the trouble you are experiencing is not listed in this table or you are unable to remedy the problem by yourself, please contact Hilti Service. Trouble or fault Possible cause Action to be taken The power tool does not The battery is not fully inserted.
Page 13
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.