Setting Audio; Eq Menu; Select Preset Equalizer; Adjust Eq Parameters - Macrom M-DVD5000 User Manual

Setting Audio

EQ Menu

The Audio Control feature allows you to easily adjust your audio system to meet the acoustical
characteristics of your vehicle, which vary depending on the type of vehicle and its measurements.
Proper setting of the Fader and Balance boosts the effects of the cabin equalizer.

Select Preset Equalizer

1. Enter the EQ setup mode
Touch the [ ] icon in the user interface and the
EQ setup interface will display on the screen.
2. Select EQ mode
Touch the desired EQ selection: [ EQ OFF ] /
[ POP] / [ Rock ] / [ Metal ] / [ Dance ] / etc, and the
EQ mode will change.

Adjust EQ Parameters

To adjust EQ parameters, touch and drag the parameters adjustment bar.
[ User ]: Set the desired audio effect.
[ Reset ]: Cancel the equalizer function settings.
Adjust Balance
You can adjust front/back/left/right balance of the speaker and the subwoofer volume to get
balanced listening effect according to the surroundings and your interest.
1. Enter the EQ setup mode
Touch the [ Balance ] icon in the user interface and
the EQ setup interface will display on the screen.
2. Adjust level and subwoofer.
Touch [ - ] / [ + ] to adjust the setting.
3. [ Loud: On/Off ]: When listening to music at low volumes,
this featurewill selectively boost certain bass
and treble frequencies.
Notes:
1. The parameters of the EQ modes has been preset and you can not change them besides 'User'.
2. The EQ mode will change to 'User' automatically when you adjust the frequency value under the
modes besides 'User'.
3. The value of Sub is independent of EQ mode and can be adjusted separately.
M-DVD5000 User manual_ENG.indd 7
- 7 -
28/12/2016 09:05:25