Related Manuals for GreenWorks Pro 2103102CT
Summary of Contents for GreenWorks Pro 2103102CT
- Page 1 60V Cordless String Trimmer 2103102CT Owner’s Manual TOLL-FREE HELPLINE: 1-855-345-3934 www.GreenWorksTools.com Read all safety rules and instructions carefully before operating this tool.
-
Page 2: Table Of Contents
CONTENTS Contents ..........................2 Product Specifications ......................2 Important Safety Instructions ....................3 Symbols ..........................5 Know Your String Trimmer ....................7 Assembly ..........................9 Operation ........................... 1 5 Battery & Charger Maintenance..................2 3 Maintenance........................... 25 Environmentally Safe Battery Disposal .................26 Troubleshooting........................27 Limited Warranty........................29 Exploded View and Part List ........ -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS W A R N I N G Read and understand all instructions before using this product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. • Use only identical manufacturer’s replacement parts and accessories. Use of any other parts may create a hazard or cause product damage. - Page 4 IMPORTANT SAFETY INSTRUCTIONS • Do not dispose of the batteries in a fire. The cells may explode. Check with local codes for possible special disposal instructions. • Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin.
-
Page 5: Symbols
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second) - Page 6 SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
-
Page 7: Know Your String Trimmer
KNOW YOUR STRING TRIMMER Fig. 1... - Page 8 KNOW YOUR STRING TRIMMER KNOW YOUR STRING TRIMMER (See Figure 1.) The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
-
Page 9: Assembly
ASSEMBLY UNPACKING This product requires assembly. • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the tool carefully to make sure no breakage or damage occurred during shipping. •... - Page 10 ASSEMBLY W A R N I N G If any parts are damaged or missing, do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. W A R N I N G Do not attempt to modify this product or create accessories not recommended for use with this string trimmer.
- Page 11 ASSEMBLY ATTACHING THE GUARD (See Figure 3.) NOTE: Install the guard before the attachment is connected to the lower shaft. Invert the string trimmer to access the trimmer head. Remove supplied screws (1) from the trimmer head (4) with a philips head screwdriver (not included).
- Page 12 ASSEMBLY INSTALLING THE UPPER SHAFT TO THE LOWER SHAFT (See Figure 4.) W A R N I N G Never install, remove, or adjust any attachment while the string trimmer is running. Failure to stop the motor can cause serious personal injury. The attachment connects to the power head by means of a coupler device.
- Page 13 ASSEMBLY ATTACHING THE AUXILIARY HANDLE (See Figure 5.) Loosen the two screws (1) in the handle with a philips screwdriver (not included) and remove the screws from the handle. Fig. 5.1 Attach the auxiliary handle (2) and lower clamp (3) on the shaft. Adjust handle up or down, if necessary, to desired operating position.
- Page 14 ASSEMBLY ADJUSTING THE CUTTING SWATH (See Figure 6.) This trimmer is equipped with a line cut-off blade on the guard. The line cut off blade continuously trims the line to ensure a consistent and efficient cut diameter. Advance line whenever you hear the engine running faster than normal, or when trimming efficiency diminishes.
-
Page 15: Operation
OPERATION W A R N I N G Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. W A R N I N G Do not use any attachments or accessories not recommended by the manufacturer of this product. - Page 16 OPERATION INSTALLING THE BATTERY PACK (See Figure 7.) • Align the battery with the battery opening. • Insert battery pack into tool until an audible "click" is heard. REMOVING THE BATTERY PACK (See Figure 7.) • Press the battery release button (1) in the back of the trimmer and pull battery pack out of tool. Fig.
- Page 17 OPERATION OPERATING THE TRIMMER (See Figure 9.) W A R N I N G Always hold the string trimmer away from the body keeping clearance between the body and the string trimmer. Any contact with the string trimmer cutting head while operating can result in serious personal injury.
- Page 18 OPERATION ADVANCING LINE (See Figure 10.) While the string trimmer is operating, the cutting line gets worn down and becomes shorter. This trimmer is equipped with bump feed line advancement, which advances additional line once the head is bumped on the ground while rotating. The cutting blade will cut the line to keep an accurate cutting swath.
- Page 19 OPERATION When installing new line on an existing spool, hold the spool as shown. Bend the line at the midpoint and insert the bend into the slot in the center rim of the spool. Ensure line snaps into position in the slot. Slot Fig.
- Page 20 OPERATION Place the spool in the cover as shown below. Fig. 11.5 10. Insert the ends of the lines through the line exit holes in the sides of the cover. Fig. 11.6 11. Reinstall the spool and cover onto the trimmer head. Push until cover snaps into place. Fig.
- Page 21 OPERATION REPLACING THE BUMP KNOB (See Figure 12.) Remove the battery pack. Press the tabs simultaneously on the side of the trimmer head and remove cover and spool. Cover Spool Fig. 12.1 While holding the bump knob (1), firmly pull it out. Fig.
- Page 22 OPERATION CUTTING TIPS (See Figure 13.) • Keep the trimmer tilted toward the area being cut; this is the best cutting area. • The trimmer cuts when passing the unit from right to left. This will avoid throwing debris at the operator.
-
Page 23: Maintenance
MAINTENANCE GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, lubricant, grease, etc. Always store the machine clean and in a dry enclosure with the battery charged. Each time Every year Every two... -
Page 24: Environmentally Safe Battery Disposal
ENVIRONMENTALLY SAFE BATTERY DISPOSAL The following toxic and corrosive materials are in the batteries used in this string trimmer battery pack: Lithium-Ion, a toxic material. W A R N I N G All toxic materials must be disposed of in a specified manner to prevent contamination of the environment. -
Page 25: Troubleshooting
TROUBLESHOOTING Problem Cause Solution 1. The battery pack is not 1. Attach the battery pack to the trimmer. connected to the trimmer. 2. No electrical contact 2. Remove battery check contact and reinstall between the trimmer and String trimmer the battery pack. battery. - Page 26 TROUBLESHOOTING Problem Cause Solution 1. Lines are welded to 1. Lubricate with silicone spray. themselves. 2. Not enough line on 2. Install more line. Refer to Line spool. Replacement earlier in this manual. Lines will not advance. 3. Lines are worn too short. 3.
-
Page 27: Limited Warranty
LIMITED WARRANTY GREENWORKS™ hereby warranties this product, to the original purchaser with proof of purchase, 4 year warranty against defects in materials, parts or workmanship. GREENWORKS™, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. - Page 28 EXPLODED VIEW...
-
Page 29: Parts List
PARTS LIST Item No. Part No. Description 310011453 Bare tool assembly 32201836 Screw and washer assembly 341081468 Cover 34105836-4 Auxiliary handle 34203836 Rubber washer 33301836 Clamp 34201877 Rubber ring 341111437AB Knob 333031453 Edge guide 332041428 Spring 341041429AB Bump knob 311101429 Spool 311091429 Spool cover... - Page 30 Greenworks Tools PO Box 1238 Mooresville, NC 28115 TOLL-FREE HELPLINE: 1-855-345-3934 Rev: 00 (08-06-16)