Setting silent mode
Setting the terminal to silent mode does not
・
mute sounds for shutter, playback of video or
music, dialpad operation sound during a call
or sound emitted when
While silent mode is set, adjusting the "Ring
・
volume" in "Sound & notification" (P.159) or
turning up the volume by pressing the
volume up key cancels silent mode.
Setting silent mode (with vibration)
Press the volume up or down key.
1
.
2
The icon in the volume control bar will
・
change to
vibration) turned on.
Tap
to cancel silent mode (with
・
vibration).
Setting silent mode (without
vibration)
Press the volume down key for
1
over a second.
The icon in the volume control bar will
・
change to
(without vibration) turned on.
is tapped, etc.
, with silent mode (with
, with silent mode
Capturing a still image or video
displayed on the screen
You can capture what is displayed on the
screen. (Take screenshot/Record screen)
Capturing a still image (Take
screenshot)
On the screen you want to capture,
1
press and hold
down key for over a second at the
same time.
Screenshot is captured and
・
in the status bar.
❖ Information
Alternatively, press and hold
・
u
second
Tap [Take screenshot] to capture
screenshot.
Drag the status bar downwards
・
captured.] to check captured images in the "Album"
or "Photos" application. Also, tap [SHARE] to attach
captured images to an application to send or to
share them.
Before Using the Terminal
P
and volume
appears
P
for over a
u
Tap [Screenshot
40