Sony Xperia Z5 Premium Instruction Manual page 157

Setting USB tethering
From the Home screen,
1
u
[Settings]
[Tethering & portable hotspot].
Connect the terminal to the PC
2
with a USB compatible PC with
Micro USB Cable 01 (optional) etc.
(P.35).
When you connect microUSB cable etc.
･
for the first time, the driver software for
the terminal is installed to a PC. Wait for
a while until installation is completed.
When "Install software" screen appears
･
on the terminal, tap [SKIP].
Tap of "USB tethering" or drag
3
it right.
❖ Information
System requirements (OS) for USB tethering are as
･
follows.
- Microsoft Windows 8/8.1
- Microsoft Windows 7
- Microsoft Windows Vista
- Linux
During USB tethering, the terminal storage cannot
･
be mounted with a PC.
USB tethering can be used with Wi-Fi tethering or
･
Bluetooth tethering at the same time.
u u
[More]
Setting Wi-Fi tethering
From the Home screen,
1
u
[Settings]
[Tethering & portable hotspot].
Tap of "Portable Wi-Fi
2
hotspot" or drag it right.
❖ Information
If Wi-Fi tethering starts while connecting to Wi-Fi
･
network or the terminal and DLNA device are
connected via Wi-Fi network, Wi-Fi network is
disconnected. Wi-Fi network is automatically
connected when Wi-Fi tethering ends.
Wi-Fi tethering can be used with USB tethering or
･
Bluetooth tethering at the same time.
Setting up a portable Wi-Fi hotspot
You can use the terminal as a Wi-Fi access
point to connect up to 10 wireless LAN
devices to the Internet simultaneously.
From the Home screen,
1
u
[Settings]
[Tethering & portable hotspot].
[Portable Wi-Fi hotspot
2
u
settings] [Configure Wi-Fi
hotspot].
Enter a network SSID of the Wi-Fi
3
access point to set.
The device name of the terminal is set
･
by default.
u u
[More]
u u
[More]
Settings
155