Using "Osaifu-Keitai
compatible service"
From the Home screen,
1
u
[Osaifu-Keitai].
When using for the first time, on the
・
initial setup screen, mark "Agree to the
Osaifu-Keitai Usage Regulations"
Select a service you want to use
2
from a service list.
Download an application compatible
・
with service site or service.
Hold
mark over the IC card
3
reader.
❖ Information
You can scan and write data to or from an IC card
・
reader without activating Osaifu-Keitai compatible
application.
These services are available even when the terminal
・
is off. However, they may not be available if the
terminal has been off for a long time or the battery is
too low.
Some Osaifu-Keitai compatible services are not
・
available in Emergency mode (P.41).
Depending on your installed Osaifu-Keitai
・
compatible application or its settings, your terminal
may not respond when you hover it over an IC card
reader, if the screen is locked or if the backlight or
terminal is off.
You can use Osaifu-Keitai compatible service even
・
when the PIN code for docomo nano UIM card
cannot be unlocked or PIN locked.
Note that when you do not subscribe sp-mode,
・
some functions of Osaifu-Keitai compatible service
may not be available.
Using "
(Kazashite-Link compatible
ス
service)"
u
[OK].
From the Home screen,
1
u
[NFC/Osaifu-Keitai settings]
2
drag it right
NFC Reader/Writer, P2P function is
・
enabled, and
bar.
Hold the
3
with the NFC module or a smart
poster.
かざしてリンク対応サービ
u
[Settings]
[More].
of "Reader/Writer, P2P" or
u
[OK].
appears in the status
mark over a device
u
Tap
105
Apps