Table of Contents
Advertisement
DMR is a generic name for a digital communication system protocol utilizing
4-level FSK.
In a DMR Conventional system, communications are realized by sending and
receiving digital signals on a DMR digital channel. Using a DMR ID (Unit ID or
Group ID) allows the various communications
INDIVIDUAL/ GROUP CALLS
Each channel is set up with an individual or group ID list number. To make a call,
select the channel with the ID list number you wish to call, then press the PTT
switch to start the call.
•
Your dealer may also have set Selcall on PTT for Individual or Group calls,
allowing you to make an Individual or Group call when pressing the PTT
switch.
•
To page the target transceiver instead of initiating a voice call, press the key
programmed as [Paging Call].
•
If PTT Proceed tone is enabled, the Proceed tone will sound. After the tone
ends, you can being the call.
Receiving
When you receive an individual call, a ringing tone will sound. Respond to the call
by pressing the PTT switch.
•
If the auto reset timer expires before you respond to the call, the call will
end. Your dealer can set the duration for the auto reset timer (default is 10
seconds).
When you receive a group call and the received group ID matches the ID set up
on your transceiver, a ringing tone will sound and you can hear the caller's voice.
DMR
19
Advertisement
Table of Contents
