Certification Information (Sar) - Huawei ASCEND P1 Quick Start Manual

Certification Information (SAR)
This device meets guidelines for exposure to radio waves.
Your device is a low-power radio transmitter and receiver.
As recommended by international guidelines, the device
is designed not to exceed the limits for exposure to radio
waves. These guidelines were developed by the independent
scientific organization International Commission on Non-
Ionizing Radiation Protection (ICNIRP) and include safety
measures designed to ensure safety for all users, regardless
of age and health. The Specific Absorption Rate (SAR) is the
unit of measurement for the amount of radio frequency energy
absorbed by the body when using a device. The SAR value
is determined at the highest certified power level in laboratory
conditions, but the actual SAR level of the device when being
operated can be well below the value. This is because the
device is designed to use the minimum power required to
reach the network.
The SAR limit adopted by USA and Canada is 1.6 watts/
kilogram (W/kg) averaged over one gram of tissue. The
Highest SAR value reported to the FCC and IC for this device
type when tested for use at the ear is 1.070 W/kg, when
properly worn on body is 1.160 W/kg, and when using Wi-Fi
hotspot function is 1.150 W/Kg. The SAR limit also adopted
by Europe is 2.0 W/kg averaged over 10 grams of tissue.
The highest SAR value for this device type when tested at
the ear is 0.606 W/kg, and when properly worn on the body is
0.435 W/kg.
5