Ricoh AFICIO MP 2851 Operating Instructions Manual page 37

12. Click [OK] to close the Install From Disk window.
13. Select the machine you want to use, and then click [OK].
Only machines that respond to a broadcast from the computer appear. To use a machine not listed
here, click [Specify Address], and then enter the IP address or host name of the machine.
14. Configure the default printer as necessary, and then click [Next >].
If the [Windows can't verify the publisher of this driver software] message appears, click [Install this
driver software anyway].
15. Click [Finish].
If installation is successful, the icon of the printer connected to the IPP port is added to the [Printers
and Faxes] window.
• To stop installation of the selected driver, click [Cancel] before installation is complete.
• p.38 "Using the SmartDeviceMonitor for Client port"
Using the LPR port
This describes how to install the PCL printer driver using the LPR port.
• Manage Printers permission is required to install the driver. Log on as an Administrators or Power
Users group member.
• In an IPv6 environment, you cannot use the Standard TCP/IP Port. Use the SmartDeviceMonitor for
Client port.
Installing the PCL Printer Driver
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The default interface language is English.
4. Click [PCL Printer Driver].
5. The software license agreement appears in the [License Agreement] dialog box.
After reading the agreement, click [I accept the agreement.], and then click [Next >].
6. Select a printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
Installing the Printer Driver
35
1