Ricoh AFICIO MP 2851 Operating Instructions Manual page 130

5. Appendix
Tray Switching
Host Interface
I/O Buffer
I/O Timeout
5
PCL Menu
Orientation
Form Lines
Font Source
Font Number
Point Size
Font Pitch
Symbol Set
Courier Font
Extend A4 Width
Append CR to LF
Resolution
128
Menu
You can set to switch the paper tray.
Menu
You can set the size of the I/O Buffer. Normally it is not
necessary to change this setting.
You can set how many seconds the machine should wait
before ending a print job. If data from another port usually
arrives in the middle of a print job, you should increase this
timeout period.
Menu
You can set the page orientation.
You can set the number of lines per page.
You can set the storage location of the default font.
You can set the ID of the default font you want to use.
You can set the point size you want to use for the selected
font.
You can set the number of characters per inch for the selected
font.
You can specify the set of print characters for the selected
font.
You can select a courier font type.
You can extend the printing area width when printing on A4
sheet with PCL.
When set to On, a carriage return will follow each line feed:
CR=CR, LF=CR LF, FF=CR FF.
You can set the print resolution in dots per inch.
Description
Description
Description