Advertisement
4. Removal of CD Mechanical-Unit Assembly, Main P. W. Board and Motor P. W. Board
(1) Remove one each of screws
(2) Remove 2 screws
from the top side of the mechanical unit.
(3) Remove 2 screws
from the bottom side of the chassis.
(4) Remove the connectors
(5) Remove the connector
(6) Remove 1 screw
from the top side of the P . T. cover and detach the power transformer from the chassis.
(7) Remove 1 screw
of the ground wire.
(8) Remove the connectors
(9) Remove 2 screws
from the motor P. W. board.
(10) Remove the solder from the four places of the soldering section
(11) Remove the connectors PG402 and 403 of the motor P . W. board.
and
from the main P . W. board on the side.
,
,
and
of the main P . W. board.
of the P . T. P . W. board.
,
and
of the motor P . W. board from the main P . W. board.
– 7 –
of the motor.
P G 4 0 2
P G 4 0 3
AX-F300
- Quick Links:
- Specifications
- Circuit Diagram
Hide quick links:
Advertisement
