Hitachi AXF300EBS Service Manual page 5

3. Removal of Rear Panel
(1) Remove 9 screws from the rear panel.
(2) Remove the connector
4. Removal of .ront P. W. Board
(1) Remove 2 screws and then the tone P . W. board.
(2) Remove the volume knob assy, remove the nut and remove the volume P . W. board.
(3) Remove 9 screws .
Contr ol
5. Removal of Main P. W. Board
(1) Lift up the TU P. W. board and remove it from the main P . W. board.
(2) Remove 2 screws from the top side of the main P . W. board.
(3) Remove 4 screws from the bottom side of the chassis.
(4) Remove the 4 P. W. board holders
TU P. W. board
.
N u t
from the chassis via the bottom side of the chassis.
– 5 –
AX-F300