Advertisement
9
Mode
Display
Table 1
Note:
Blinking dot on "Mode Display" indicates active heating control, burner off. Steady dot
indicates burner is on.
*: Error must be corrected to resume boiler operation. Pressing the "Reset" button is not
required.
**: The boiler circulator is energized, when boiler water temperature drops below 10° C
50°F.
(
***: Error must be corrected to resume DHW operation. Space heating not affected.
Pressing the "Reset" button is not required.
Jaguar Boiler Display Board
"Boiler Operation Status"
Description & Temperature Display
Boiler is on stand-by mode.
Temperature display shows supply water Temp.
Temperature display shows supply water Temp.
Temperature display shows supply waterTemp.
Temperature display shows supply water Temp.
Temperature Display indicates the lockout code
Reset button must be pressed to resume normal operation.
Temperature display indicates the error code.
Temperature display indicates the error code.
Space heating mode.
Domestic hot water mode.
Frost protection mode.**
Lockout (Alarm) condition.
Error Condition. *
Warning Condition. ***
Jaguar Model J-390
Advertisement
