Philips GC3135 User Manual page 9

6 Hold the iron over the sink, press and hold the Calc-Clean button
and gently shake the iron to and fro.
Steam and boiling water come out of the soleplate. Impurities and
,
flakes (if any) are flushed out.
 Release the Calc-Clean button when all the water in the tank has
been used up.
8 Repeat the Calc-Clean process if the iron still contains a lot of
impurities.
After the Calc-Clean process
1 Put the plug in the wall socket and let the iron heat up to allow the
soleplate to dry.
 Unplug the iron when the temperature light goes out.
3 Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
4 Let the iron cool down before you store it.
storage
1 Set the steam control to position 0, remove the plug from the wall
socket and let the iron cool down.
 Empty the water tank.
3 Wind the mains cord round the cord storage facility.
4 Store the iron on its heel in a safe and dry place.
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
EnGlish