Machine Disassembly
Getting Started
The flowchart
(Figure
sequence. Observe the order of the sequence to avoid damage to any of the hardware
components.
Perform the following prior to performing any maintenance procedures:
1. Remove power (A) from the system and peripherals. (Figure 3-2)
Figure 3-2. AC Adapter
2. Remove all cables from system.
3. Place the system on a stable work surface lower cover up.
4. Disable the battery switch by removing screw(s) on rear cover as shown.
Figure 3-3. Battery Switch Disabling
3-2) identifies sections illustrating the entire removal and install
A
0
0
3-4