Hitachi PSC-5T Installation And Operation Manual page 7

Lead the cable through the groove.
NOTE:
In case of connecting the accessory cable to the connector, remove the protection case.
Attach the Timer onto the holding bracket.
INSTALLATION WORK
Twist Pair Cable
Attach the
stopper to the
cable at the
inside of the
draw-out hole.
Accessory Cable
Step 1:
Insert the hooks of the Timer to
the holes at the upper side of the
holding bracket.
Step 2:
Push the lower part of the Timer
toward the holding bracket.
Step 3:
When the click sound is heard, the
Timer is attached to the holding
bracket and the mounting work is
completed.Check to ensure that the
4 hooks at the position are correctly
inserted.
2
Cable
Band (Field-
Supplied)
Band
(Field-Supplied)
Cable
Connector
Terminal
Board
/
3