Establishing Connection With Your Tablet; Connecting To Another Tablet - Logitech UNIVERSAL FOLIO Setup Manual

Establishing connection with your tablet

The keyboard case links to
your tablet via a Bluetooth
connection. The first time
you use the keyboard case,
you must pair it with your tablet.
The status light blinks blue
to indicate that the keyboard
is discoverable, ready for pairing
with your tablet.
The first time you turn on the
keyboard it remains discoverable
for 15 minutes.
If the status light turns red,
replace the batteries. For more
information, see "Replacing the
keyboard batteries."
To pair your keyboard case
with your tablet:
1
On your tablet:
– Make sure Bluetooth
is on. Select Settings >
Bluetooth > On.
– Select "Universal Folio"
from the Devices menu.
2
If your tablet requests a PIN,
enter it using the keyboard
(not on your tablet).
When successful connection
is made, the status light turns
solid blue for a short time, and
then turns off.

Connecting to another tablet

1
Move the keyboard case into
the typing position.
2
On your tablet, make
sure Bluetooth is on.
Select Settings >
Bluetooth > On.
3
Press the Bluetooth connect
button for 2 seconds until
the status light blinks blue:
The keyboard is discoverable
for 3 minutes.
5 English
4
Select "Universal Folio"
from the Devices menu.
5
If your tablet requests a PIN,
enter it using the keyboard
(not on your tablet).
When successful connection
is made, the status light turns
solid blue for a short time,
and then turns off.
2s