Advertisement
© Panduit Corp. 2015
TENSION ADJUSTMENT
There is a tension indicator on the handle of the tool. The tension setting
can be adjusted by turning the selector knob:
1-4 for H; and 5-8 for EH.
DAILY TOOL INSPECTION
1. Visually inspect nose area for foreign matter and cable tie scrap. Keep this area clear of foreign matter.
2. Visually inspect applied cable ties for correct tension and cut-off to verify the working condition of the blade and gripper.
KPPTEHB Blade Replacement Kit -
For replacement of a worn blade.
KPPTEHG Gripper Replacement Kit -
For replacement of a worn gripper.
TTLK3 Tool Tension Locking Kit -
Install to prevent adjustment of the selector knob.
TECHNICAL SPECIFICATIONS - Air Supply
Recommended regulated air pressure to tool (pressures other
than recommended may result in unsatisfactory operation):
Air consumption at 30 cycles per minute:
Line pressure to regulator:
Filter/regulator requirements:
Lubrication for air supply:
Recommended filter/regulator unit (supplied by user) with 1/8"
NPT ports and 1/4" quick disconnect (industrial interchange)
plug:
Recommended main air supply hose (10 ft.) from filter/
regulator to tool (supplied by user); includes a 1/8" NPT male
connector (to regulator) and a 1/8" quick disconnect socket (to
tool):
OTHER SPECIFICATIONS
Life cycle of the blade under normal operating conditions
Sound Level:
Measured sound level per ISO 15744.
Vibration Level:
Measured vibration level per ISO 20643.
OPERATION INSTRUCTIONS
ITEM
ITEM
Regulator settings: 85 PSIG (5,9 bar) with a max. 10 PSI (0,7
0.47 cfm @ 85 PSIG (0,222
Minimum 80 PSIG (5,5 bar), Maximum 125 PSIG (8,6 bar)
5 micron maximum element rating, 5 PSI (0,3 bar) maximum
pressure drop @ 80 PSIG (5,5 bar) inlet pressure and 12 cfm
(5,7
/sec) flow minimum.
l
Air line lubricators are NOT to be used.
Recommended source: Panduit Part Number PL289N1
Recommended source: Panduit Part Number PPH10
Page: 3 of 4
ALL KITS SOLD SEPARATELY
CONTACT PANDUIT
FOR MORE INFORMATION.
DESCRIPTION
bar) drop. DO NOT EXCEED 90 PSIG
(6,2 bar).
/sec @ 5,9 bar)
l
DESCRIPTION
100,000 cycles
73 dB
2
3.1 m/s
PPTEH
Advertisement
