Creating And Navigating A Route Using The Waypoint List; Editing A Saved Route; Viewing A List Of Routes; Browsing For And Navigating A Saved Route - Garmin FF 650 GPS Owner's Manual

2
Pan the waypoint map to select the starting location of the
route.
3
Follow the onscreen instructions to add a turns.
4
Select MENU > Navigate To.
5
Select an option.
Creating and Navigating a Route Using the
Waypoint List
1
Select User Data > Routes & Auto Guidance Paths > New
> Route Using Waypoint List.
2 Select waypoints.
3 Select BACK > Navigate To.

Editing a Saved Route

You can change the name of a route or change the turns the
route contains.
1
Select User Data > Routes & Auto Guidance Paths.
2
Select a route.
3
Select Edit Route.
4
Select an option:
• To change the name, select Name, and enter the name.
• To select a waypoint from the turn list, select Edit Turns >
Use Turn List, and select a waypoint from the list.
• To select a turn using the chart, select Edit Turns >
Route Using Chart, and select a location on the chart.

Viewing a List of Routes

Select User Data > Routes & Auto Guidance Paths.

Browsing for and Navigating a Saved Route

Before you can browse a list of routes and navigate to one of
them, you must create and save at least one route.
1
Select User Data > Routes & Auto Guidance Paths.
2
Select a route.
3
Select Navigate To.
4
Select an option:
• To navigate the route from the starting point used when
the route was created, select Forward.
• To navigate the route from the destination point used
when the route was created, select Backward.
A magenta line appears. In the center of the magenta line is
a thinner purple line that represents the corrected course
from your present location to the destination. The corrected
course is dynamic, and it moves with your boat when you are
off course.
5
Review the course indicated by the magenta line.
6
Follow the magenta line along each leg in the route, steering
to avoid land, shallow water, and other obstacles.

Track

7
If you are off course, follow the purple line (corrected course)
to go to your destination, or steer back to the magenta line
(direct course).

Deleting a Saved Route

1
Select User Data > Routes & Auto Guidance Paths.
2
Select a route.
3
Select Delete.

Deleting All Saved Routes

Select User Data > Manage Data > Clear User Data >
Routes & Auto Guidance Paths.
A track is a recording of the current path of your boat. You can
show your current track in waypoint map view.

Setting the Color of the Track

1
Select User Data > Tracks > Active Track Options > Track
Color.
2
Select a track color.

Clearing the Track

Select User Data > Tracks > Clear Active Track > OK.
Managing the Track Log Memory During
Recording
1
Select User Data > Tracks > Active Track Options.
2
Select Record Mode.
3
Select an option:
• To record a track log until the track memory is full, select
Fill.
• To continuously record a track log, replacing the oldest
track data with new data, select Wrap.
Configuring the Recording Interval of the
Track Log
You can indicate the frequency at which the track plot is
recorded. Recording more frequent plots is more accurate but
fills the track log faster. The resolution interval is recommended
for the most efficient use of memory.
1
Select User Data > Tracks > Active Track Options >
Record Interval > Interval.
2
Select an option:
• To record the track based on a distance between points,
select Distance > Change, and enter the distance.
• To record the track based on a time interval, select Time >
Change, and enter the time interval.
• To record the track plot based on a variance from your
course, select Resolution > Change, and enter the
maximum error allowed from the true course before
recording a track point.
Deleting All Saved Waypoints, Routes, and
Tracks
Select User Data > Manage Data > Clear User Data > All >
OK.

AIS Radar

The Automatic Identification System (AIS) enables you to
identify and track other vessels, and alerts you to area traffic.
Track
9