Figure 37 Removing the filler panel from an interface card slot
Figure 38 Installing an interface card
Installing an OAP card
CAUTION:
When you install or remove an OAP card, do not touch the
•
surface-mounted components.
After you remove the OAP card, install the filler panel into the slot
•
immediately if no new OAP card is installed.
The S5820X-28C switch provides an OAP card slot and comes with a filler
panel in the OAP card slot.
You can install an OAP card as needed. For the OAP cards available for the
S5820X-28C switch, see H3C S5820X Switch Series Installation Guide. For
more information about OAP cards, see H3C OAP Cards User Manual.
26