FOR BETTER RECEPTION
FM
Fully unwind the wire antenna. Then extend the wire
antenna and place it in the position that sounds best.
NOTE: Do not connect to outside antenna.
TUNING INTO A STATION MANUALLY
1. Press the FUNCTION button to
TUNER.
TO SEARCH FOR A STATION QUICKLY
Hold the TUNING UP or DOWN button and station searching starts automatically. When a station is found, searching
stops automatically.
However, it may not stop if the signal is weak. In this case, search for the station manually.
PRESETTING STATIONS
You can tune into a stored station directly by entering the preset number.
20 stations on FM band can be preset.
20 stations on MW/AM band can be preset.
1. Press the FUNCTION button to
TUNER.
4. Press the MEMORY /
button.
MEMORY
CLOCK
TIMER
2. Press the BAND button to select
the desired band.
2. Select a band.
5.
CLOCK
Press the
to preset number.
SKIP
HOUR
SKIP
MIN
MW/AM
Connect the loop aerial (provided) to the 'MW/AM
LOOP ANTENNA' snap terminals at the back of the
unit.
BAND
BAND
PRESET
buttons
PRESET
- E9 -
3. Tune into a station.
I
3. Tune into a station.
I
6. Press the MEMORY /
button.
MEMORY
CLOCK
TIMER
Then, repeat steps 2 to 6.
CLOCK