Remote Control - Audiovox Mini Hi-Fi System Operating Instructions Manual

RECORDING ----
RECORDING FROM THE CD PLAYER
1. Press the FUNCTION button to CD.
3. Press the RECORD button
which also engage the
PLAY button.
TO STOP RECORDING
Press the STOP/EJECT button of Deck A.
TO INTERRUPT RECORDING
Press the PAUSE button of Deck A.
To resume recording, press the PAUSE button again.

REMOTE CONTROL

TO INSTALL BATTERIES
1. Open the battery door.
DECK A ONLY
DECK A
1) X-BASS button
2) MEMORY button
3) TUNING( / )/RANDOM/REPEAT buttons
4) FUNCTION button
5) SLEEP button
6) SKIP/PRESET/MIN / HOUR buttons
7) STOP button
8) PLAY/PAUSE button
USING THE REMOTE CONTROL CORRECTLY
• Point the Remote Control at the REMOTE SENSOR located on the unit.
• When there is a strong ambient light source, the performance of the infrared REMOTE
SENSOR may be degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 6 meters (19 feet).
NOTE:
If there is no sound from all the speakers, the MUTE function might have been
activated. To disable the MUTE function, press the MUTE button on the unit and
remote handset.
2. Insert two R03 (AAA or UM-4)
size batteries.
+
+
- E19 -
2. Insert a tape into the
cassette compart-
ment.
4. Press the play/pause
button of the CD player.
TO ERASE A RECORDED TAPE
1. Press the FUNCTION button to TAPE.
2. Insert a tape with the side you want to erase fac-
ing you.
3. Press the RECORD button to start erasing.
9) POWER button
10) DISC SKIP button
11) VOLUME UP/DOWN button
12) OPEN/CLOSE button
13) TIMER button
14) BAND button
15) MUTE button
16) STEREO WIDE button
BATTERY REPLACEMENT
When batteries become weak, the operating distance
of the Remote Control is greatly reduced and you will
need to replace the batteries.
NOTE:
If the Remote Control is not going to be used for a
long time, remove the batteries to avoid damage
caused by battery leakage corrosion.
This side
you want
to record
DECK A
I