Tape Care Tips - Audiovox Mini Hi-Fi System Operating Instructions Manual

TAPE CARE TIPS

Preventing accidental erasure
1. Cassette tapes have two erase-protection tabs - one for
each side. To protect a recording from being accidentally
recorded over or erased, use a screwdriver to remove
one or both of the cassette tape's erase-protection tabs.
DUBBING ----
Use only normal (type I) tapes for recording and playback.
1. Press the FUNCTION button to
TAPE.
4. Press the PAUSE button.
DECK A
TO STOP DUBBING
Press the STOP/EJECT buttons of Deck A and Deck B.
RECORDING ----
Use only normal (type I) tapes for recording.
RECORDING FROM THE BUILT-IN TUNER
1. Press the FUNCTION button
to TUNER and tune into a de-
sired station. (see page E10)
3. Press the RECORD button
which also engages the
PLAY button.
• If whistle is heard (beat) it may be reduced by switching the "Beat Cut" to the other position.
FROM DECK B TO DECK A
2. Insert the recorded tape into Deck B
and the blank tape into Deck A.
Tape to be recorded Tape to be played
DECK A
5. Press the RECORD button which
also engages the PLAY button.
DECK A
DECK A ONLY
DECK A
- E18 -
2. If you want to record on a tape side after you have
removed the erase protection
tab, place a piece of strong plas-
tic tape over that side's erase-
protection hole.
Notes:
1) Be sure you cover only the hole
originally covered by the
erase-protection tab.
2) Removing the erase-protection tabs does not prevent
a bulk eraser from erasing a cassette tape.
3. Set the MODE selector according
DECK B
6. Press the PLAY button.
NOTE: Do not change the dubbing speed when dubbing
is in progress.
2. Insert a tape into the cassette compartment.
DECK A
to the desired dubbing speed:
NORMAL or HIGH.
DUBBING
FM STEREO FM MONO
BEAT CUT
DECK B
This side
you want
to record