Advertisement
OPERATION
4. OPERATION
STEP 2
STEP 1
STEP 3
09
Dry mode
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor units tarts flashing.
1. Press the MODE button to select DRY mode.
2. Press the UP / DOWN buttons to set the
desired temperature. The temperature
can be set within a range of 17 C~30 C
O
O
(62 F~88 F) in 1 C(2 F) increments.
O
O
O
O
3. Press the button to start the airconditioner.
NOTE:
In the DRY mode, you can not switch
the fan speed. It has already been automatically
controlled.
Timer operation
Timer ON only
This function will allow the unit to start automatically
at the set time. The TIMER ON can be set while the
unit is on or off.
UNIT ON
-- Press the TIMER ON
button to initiate the
auto-on time sequence. The set time is displayed
in the remote control display. Every time the
TIMER ON button is pressed, the time will
increase by 30 minutes, up to 10 h. It will
increase by 60 minutes, afterwards, until the time
setting reaches 24 h.
-- When the TIMER ON is set, the TIMER light on
unit illuminates. The unit will continue to run at
the set time.
UNIT OFF
-- Set the timer described in the UNIT ON section.
-- The unit will start at the set time.
Adjust the TIMER ON settings to 0.0 to cancel this
option.
OPERATION
4. OPERATION
Timer OFF only
This function will allow the unit to stop automatically
at the set time. The timer can be set while the unit is
on or while it is off.
UNIT ON
-- Press the TIMER OFF
button to initiate the
auto--off time sequence. The set time is displayed
in the remote control display. Every time the
TIMER OFF button is pressed, the time will
increase by 30 minutes, up to 10 h. It will increase
by 60 minutes, afterwards, until the time settings
reach 24 h.
-- When the TIMER OFF is set, the timer light on the
unit illuminates and the unit turns off automatically
at the set time.
UNIT OFF
-- Set the TIMER off as described in the UNIT ON
section.
-- The TIMER display on the unit illuminates and the
unit will remain off.
Adjust the TIMER OFF settings to 0.0 to cancel this
option.
Timer ON and Timer OFF
Use both functions to program the unit to turn on
and shut off at specified times.
UNIT OFF
-- Set TIMER ON as previously described.
-- Set TIMER OFF as previously described.
-- The unit will start automatically at the set
TIME ON and will turn off at the set TIME OFF.
UNIT ON
-- Set TIME OFF as previously described.
-- Set TIME ON as previously described.
-- The unit will turn off automatically at the set
TIME OFF and will turn on at the set TIME ON.
10
Advertisement
