Advertisement
DISPLAY
2. DISPLAY
SET TEMPERATURE
TIMER ON OFF
03
Mode display
Displays the selected mode.
AUTO, COOL, DRY, HEAT
Transmission Indicator
This transmission indicator will light when remote
controller transmits signals to the indoor unit.
Temp./Timer display
The temperature setting (from 17 C/62 F to
O
O
30 C/88 F) or timer setting (0~24h) will be displayed.
O
O
If FAN mode is selected, there will be no display.
ON/OFF display
This indicator will be displayed when the unit is
operating.
Mode display(FAN mode)
Fan speed display
Displays the selected fan speed: AUTO, HIGH,
MED and LOW. Nothing displays
when the fan
speed is selected in AUTO speed. When AUTO or
DRY Mode is selected, there will be no signal
displayed.
FOLLOW ME display
When pressing FOLLOW ME button in COOL or
HEAT mode, the remote sensing function is activated
and this indicator displays.
TIMER display
This display area shows the settings of the TIMER.
That is, if only the Auto-on time function is set, it will
display TIMER ON. If only the Auto-off time function
is set, it will display TIMER OFF. If both functions are
set, it will display TIMER ON OFF.
BUTTONS
3. BUTTONS
1
2
7
3
4
8
9
5
10
6
11
NOTE:
1. Vertical swing, Ionizer, Smart eye, Silence
are not available for standard models;
2. Buttons design might be slightly different
from the actual one.
1
UP Button(
)
Press this button to increase the setting
temperature
DOWN Button(
)
Press this button to decrease the setting
temperature
2
MODE Button (
)
Press the mode button repeatedly to change
operation mode
AUTO
COOL
DRY
HEAT
NOTE
HEAT mode will not be activated for
：
cooling only models
3
ON/OFF Button (
)
Operation starts when this button is pressed
and stops when this button is pressed again.
4
SWING Button (
)
The horizontal louver will move an angle of
6 degree for each press. If keep pushing more
than 2 seconds, the louver will swing up and
down automatically.
SWING Button (
)
The vertical louver will move an angle of 6
degree for each press. And the temperature
,
display area of indoor unit displays
for
one second. If keep pushing more than 2
seconds, the vertical louver swing feature is
activated. And the indoor unit displays
IIII
flash four times, then the temperature setting
reverts back. If the vertical louver swing feature
,
is stopped, it displays LC
and remains on
for 3 seconds.
FAN
,
,
04
Advertisement
