English - Alesis ELEVATE 3 MKII User Manual

User Guide (English)
Introduction
1. Make sure all items listed in the
2. Read safety instruction booklet before using the product.
3. Place the product in an appropriate location for operation.
4. Ensure high quality, shielded audio cables are used away from sources of electromagnetic
interference.
Box Contents
Elevate 3 MKII Speakers (Stereo Pair)
RCA-to-1/8" (3.5 mm) Audio Cable
1/8" (3.5 mm) Interconnection Cable
Power Cable
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit alesis.com.
For additional product support, visit alesis.com/support.
Setup
Items not listed in Introduction
Before turning on the Elevate 3's power, do the following:
1. Ensure all cable connections have been made correctly.
2. Ensure the volume controls for the speakers are turned down.
3. Connect any other peripheral devices to Elevate 3 and power on those devices (such as a
mic, mixer, etc.).
4. Insert the power cable into the power connector on the rear panel of Elevate 3 and plug
the power cable into an AC outlet.
5. Then power-up Elevate 3.
6. Adjust the volume control on Elevate 3.
Mixer
Introduction Box Contents
Box Contents are sold separately.
are included.
Power
3