Advertisement
Internal Clock
If hotel mode is active a new function (add wake up timer) will be available in Settings/Timers menu.
That function will open a new menu to set wake up time. After timer is saved tv can wake up
automatically on desired time.
If alarm option was selected as "on" after wake up tv will show welcome image and an alarm will be
heared. Then any key will stop alarm and welcome image.
If alarm option was selected as "off" after wake up tv will not show welcome image and the alarm will
not be activated.
There is a "wakeup time channel" option in hotel mode menu, Its used to set the channel, whose time
information to be used for wakeup timer. If this option is "0" time information of the channel which is
being watched when timer menu is opened, will be used. Otherwise a "please wait" message will be
displayed before the menu is open and during "please wait" time information of the channel will be get.
(This can take up to 30s). The "wakeup time channel" should be a digital service.
Pin8
If ON is selected Pin8 will go on normal operation , and it is going to switch between sources
automatically. If It is OFF ,Pin8 ignored , and the automatic source switching would be enabled. This
functions DISABLED/ENABLED value does not effect the profile Pin8Standby option (which can be
disabled or enabled via profile manager).
Attention: It has no connection by the profile Pin8Standby option whose function is automatic standby
waking up. Also profile Pin8 DISABLED/ENABLED value does not effect this option.
EPG Enable/Disable
If hotel mode is active and this item is set as "Enabled" EPG button will work to access EPG menus. If
it is set to "Disabled", EPG menus will not be accessible.
NIT Update
This option enables or disables NIT update mechanism of the TV if Hotel Mode is enabled in the Hotel
Menu Dialog.
Furthermore, if TerrestrialCableCombinedSearch is selected as ENABLED and CustomChannelList is
selected as Single List in the profile, then the user will be able to see the following selection before
starting auto search:
Aerial & Cable Search
If the user performs an auto search with Aerial & Cable Search selection, then TV will not update NIT.
If the user performs an auto search with other selections, then TV will update NIT just like a regular
DVB TV.
Hide quick links:
Advertisement
