Advertisement
Welcome message
Welcome message option is only visible at the hotel configuration menu when it is enabled from
the profile option. If this option is unactivated, no welcome message does do occurs at the tv-
power on term.
When the welcome message option is visible, it provides disables or enables the message screen
according to customer desire.
As default behaviour a welcome message image will be displayed (if hotel mode is enabled). The
image will stay on screen until user presses a key.
On the bottom side of image there is an message (osd message) displaying "press any
key".This message is only visible when the customer sets via profile manager as Toshiba or
Sharp, or if the softwares which uses Toshiba UI. For the other customers and ui options that
warning is invisble.
Welcome image can be changed through USB (described in "copy from USB" section). A default
welcome image is available.
Welcome images must be PNG files with 960x540 resolution and 16 bit color depth.
Welcome image file sizes must not exceed 150KB (
Welcome image file sizes must not exceed 1000 KB (1024000 Bytes) for 8+4MB TVs. If 1000 KB limit
is wanted to be active, then profile option EnhancedLogo should be enabled or Satellite should be
enabled.
Copy service list to USB
This button is only visible at the hotel configuration menu if it was enabled from the profile option.
When this button is pressed all the services tuning informations (program number, name,
frequency...) are written to an xml file. Then this file (service_list.xml) is copied to root of usb.
Meanwhile a "Please wait" dialog is displayed. The file cen be edited by supplied
"AutoChannelConfigurator" tool.
Copy service list from USB
This button is only visible at the hotel configuration menu if it was enabled from the profile option.
When this button is pressed the TV will look for a service_list.xml file in the to root of usb. If the file is
available the services in the file will be added. Meanwhile a "Please wait" dialog is displayed.
P.S. Help about "AutoChannelConfigurator" tool is available in it.
Signal Lost (no signal) message
As default behaviour, if there is no signal the same welcome image is displayed. This time osd
message is "no signal".
2
3
4
153600 Bytes
) for 8+2MB TVs
0
2
3
Hide quick links:
Advertisement
