Good Servicing Practices - Godrej GSC 18 FGA 5 WOG Service Manual

To minimize the risk of personal injury or property damage it is important that the following safe servicing
practices be observed.
1) Read carefully the instruction booklet supplied with the air-conditioner from time to time. Be sure you
are operating air-conditioner properly.
2) Know the location of customer's air-conditioner circuit breakers or fuses.
3) Before servicing the air-conditioner, UNPLUG the power cord before performing any repairs or
removing any panel. Note Except for electrical & partly mechanical performance testing, none of repairs
require electrical power.
4) Be careful when handling air-conditioner grille and access panel, parts or any components which may,
have sharp edges. Avoid placing your hand into any area of the air-conditioner which can't first visually
inspect for sharp edges.
5) Always use the correct tools for a job and make sure tools are in good condition. Worn, faulty and
misused tools can cause accidents.
6) Never interfere with or bypass the operation of any switch, component or feature of the air-conditioner.
7) Use only replacement parts of the same size and capacity as per the list of parts. If you have any
questions contact our branch.
8) When replacing any component, be sure any green ground wires are connected securely in their original
position to avoid danger of shock or short circuit.
9) Before connecting the power supply, make sure no un insulating wires or terminals are touching the
cabinet. Electrical wiring and all grounds must be correctly reconnected and secured away from sharp
edges, components and moving parts. All panel and covers etc. should be reinstalled before the
air-conditioner is plugged in.
10) The line cord must be plugged into a grounded, three plug pin. Never cut or remove the third
(ground) or top pin from the power cord plug.
11) Do not substitute ordinary wire for any internal wiring of air-conditioner. The wire must carry heavy
current and can be subjected to heat. It is very important that all connections are tight and secure.
12) Make an insulation test, after the air-conditioner is repaired, to protect the customer from being
exposed to shock hazards. (Value to be not less than 1M)
13) Always work in an well ventilated space/area during sealed system repairs.

GOOD SERVICING PRACTICES:

Godrej & Boyce Mfg. Co. Ltd, HO Service, Mumbai SM 3274 - Page 5 of 23