Features Of Remote Controller - Godrej GSC 18 FGA 5 WOG Service Manual

Hide thumbs

Table Of Contents

Table of Contents

● COOLING MODE

The Cooling function allows the air conditioner to cool the room and at the same time reduces

To activate the cooling function, press the MODE button until the symbol◄ on the display direct towards COOL. Set

temperature can be adjusted by ▲and ▼ keys.

● TIMER MODE – TIMER ON

The function is used to switch on the Air Conditioner automatically. To program the TIMER ON, the air conditioner

should be off. Press TIMER button, set the temperature by ▲and ▼ keys, Press the TIMER button again, set the time

by pressing ▲and ▼ keys

● TIMER MODE – TIMER OFF

The function is used to switch off the Air Conditioner automatically. To program the TIMER OFF, the Air conditioner

should be ON. Press TIMER button, set the temperature by ▲and ▼ keys, Press the TIMER button again, set the time

by pressing ▲and ▼ keys

Note: To Cancel TIMER ON or TIMER OFF function, press the TIMER button again. In case of power failure these

functions are not remembered by the Air Conditioner and need to be set again.

● FAN button

By pressing this button, Auto, Low, Middle, High speed can be circularly selected. After powered on, Auto fan speed is

by default. Under Dehumidify mode, Low fan speed only can be set up.

●DRY MODE button:

This function reduces the humidity of the room at faster rate. To set the DRY mode, press MODE buttons until arrow ◄

directs towards DRY. Under the Dry mode, the fan speed isn't adjustable, low fan speed is imperative. An automatic

function of alternating cooling cycle and air fan is activated.

● FEEL MODE (or AUTO MODE)

To activate the FEELMODE (automatic mode), press MODE buttons until arrow ◄ directs towards FEEL. In this mode

the fan speed and the temperature are set automatically according to the room temperature ( sensed by the indoor

temperature sensor) to ensure user comfort.

Ambient Temperature

< 20° C

20°C ~ 26°C

>26°C

● SLEEP MODE

To activate the SLEEP mode, press SLEEP button on the remote controller. SLEEP function can only be selected in

COOL, FEEL or HEAT mode.

In this mode the set temperature will automatically raise by 1°C every 60 minutes to achieve a total rise of 2°C during

the first 2 hours of work. In heating mode, the set temperature is gradually decreased by 2°C during the first 2 hours of

work. After 10 hrs of running in sleep mode the air conditioner is switched off automatically.

Godrej & Boyce Mfg. Co. Ltd, HO Service, Mumbai