Related Manuals for Godrej GSC 12NTC3-WUA
Summary of Contents for Godrej GSC 12NTC3-WUA
-
Page 4: Performance Parameters
PERFORMANCE PARAMETERS MODEL NAME GSC 12NTC3-WUA OPERATING MODE Cooling RATED VOLTAGE 230 V RATED FREQUENCY/PHASE 50 Hz/1 Ø COOLING CAPACITY (W) 3350 W RATED POWER INPUT (W) 950 W AIR FLOW VOLUME 730 CMH RATED INPUT CURRENT 4.40 A REFRIGERANT... - Page 5 Protection of environment “Protection of environment" is one of the core values of Godrej and we seek your co-operation to make sure that the product, packaging and plastic material is not disposed as unsorted municipal waste. This symbol is known as the "Crossed-out Wheelie Bin Symbol". It means that the product should not be disposed of with your general house-hold waste.
- Page 13 “POWER” indicator : This symbol is ON when the system is in standby mode and blinks during antifungi features. “TIMER” indicator : This symbol is ON when ON/OFF timer is activated. “Compressor” indicator : This symbol is ON when the compressor is running. “Temperature”...
- Page 14 Press this button for activation and deactivation of E-saving mode. the air conditioner Press this button for activation and deactivation sleep mode If user want to make the room air cool quickly, user can press"turbo" button in cool mode initially.
- Page 15 Displayed the set temperature. Displayed clock time, press “Set time” and “HOU/MIN” buttons to set the time and it also display timer value in hours only. Displayed in according with Displayed ON symbol when vertical swing positions. user press timer key once in remote OFF state.
- Page 16 COOL, FAN, DRY, HEAT and AUTO operation When “COOL” mode is set, in accordance with D-Value between indoor room temperature and set temperature, air conditioner will start or stop the cooling operation. User can change fan speed Low, Medium, High and Auto as per requirement. When “FAN”...
- Page 17 Press timer button in remote off state to set ON timer. The timer value can be adjusted from 1h to 12h by pressing “ ” or “ ” button Press "timer " button in remote off state, timer value will appear on display. User can adjust timer value from 1h to 12h.
- Page 18 Press “ ” or “ ” button to adjust the timer time from 1h to 12h. The “ ” or “ ” is used for increment or decrement the timer value. Press "timer " button in remote on state, timer value will appear on display. User can adjust timer value from 1h to 12h.
- Page 19 If press the “H-SWING” on the remote controller, horizontal louver blades can be set at the fixed position (Fig. 1) or auto swing. “V-SWING” in ON state...
- Page 20 set temperature set by user.
- Page 21 aux. button...
- Page 29 should not increase a laundry, a bath,...
- Page 31 Step one: choosing installation location Step two: open piping hole...
- Page 32 Step three: outlet pipe Step four: connect the pipe of indoor unit...
- Page 33 Step five: install drain hose Step six: connect wire of indoor unit...
- Page 34 Step seven: bind up pipe Step eight: hang the indoor unit...
- Page 35 Step two: install drain joint...
- Page 36 Step four: connect indoor and outdoor pipes...
- Page 37 Step six: neaten the pipes...
- Page 39 cooling/ cooling/ cooling/ cooling/...
- Page 40 height...