Verifying Vn-Segment Configuration - Cisco Nexus 6000 Series Configuration Manual

Configuring VN-Segment
Procedure
Step 1
Step 2
Step 3
This example shows how to disable VN-Segment:
switch# configure terminal
switch(config)# no feature vn-segment-vlan-based

Verifying VN-Segment Configuration

Use the following commands to display VN- Segment configuration information:
Command
show vlan id vland-id-list vn-segment
show vpc consistency-parameters global
show vpc consistency-parameters vlans
Command or Action
switch# configure terminal
switch(config)# no feature
vn-segment-vlan-based
switch(config)# copy running-config
startup-config
Cisco Nexus 6000 Series NX-OS Layer 2 Switching Configuration Guide, Release 7.x

Verifying VN-Segment Configuration

Purpose
Enters global configuration mode.
Disables VN-Segment.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to
the startup configuration.
Purpose
Displays the configured VLAN-to-VN-Segment
mappings for the specified list of VLANs.
Displays information on the number of VLANs and
VN-Segment mappings on each VPC switch to help
determine any mismatches.
Displays information to identify the VLAN and
VN-Segment configuration mismatches.
209