Cisco Nexus 6000 Series Configuration Manual page 209

Configuring VM-FEX
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
Step 16
Step 17
Command or Action
shutdown
switchport mode vntag
interface ethernet slot/port
shutdown
switchport mode vntag
interface vethernet
interface-number
bind interface ethernet slot/port
channel channel-number
no shutdown
interface vethernet
interface-number
bind interface ethernet slot/port
channel channel-number
no shutdown
interface vethernet
interface-number
bind interface ethernet slot/port
channel channel-number
no shutdown
interface vethernet
interface-number
Cisco Nexus 6000 Series NX-OS Layer 2 Switching Configuration Guide, Release 7.x
Configuring the Fixed Static Interfaces
Purpose
Disables local traffic on the interface.
Shutting down the interface before enabling
Note
VN-Tag mode prevents the dynamic creation of
a fixed vEthernet interface.
Enables port extender support on the interface.
Enters interface configuration mode for the second
Ethernet port.
If this is a 10G breakout port, the slot/port syntax
Note
is QSFP-module/port.
Disables local traffic on the interface.
Enables port extender support on the interface.
Enters configuration mode for the first virtual interface
for the first Ethernet port.
Binds the virtual interface to the physical interface and
the specified port channel.
The port channel numbers of the virtual interfaces
Note
must match those configured on the vNICs.
Note If this is a 10G breakout port, the slot/port syntax
is QSFP-module/port.
Enables local traffic on the interface.
Enters configuration mode for the second virtual interface
for the first Ethernet port.
Binds the virtual interface to the physical interface and
the specified port channel.
Note If this is a 10G breakout port, the slot/port syntax
is QSFP-module/port.
Enables local traffic on the interface.
Enters configuration mode for the first virtual interface
for the second Ethernet port.
Binds the virtual interface to the physical interface and
the specified port channel.
Note If this is a 10G breakout port, the slot/port syntax
is QSFP-module/port.
Enables local traffic on the interface.
Enters configuration mode for the second virtual interface
for the second Ethernet port.
191