Create The Bubbles - SodaStream Source Quick Start Manual

CREATE THE BUBBLES

Fill line
1. Prior to making sparkling water, fill the carbonating bottle with cold water up to the fill
line.
1st
2nd
Bottle rest
3rd
2. To insert the carbonating bottle, make sure that the carbonating block is in its fully
upward position and the bottle rest is angled forward. If it isn't angled forward, pull it
towards you until it clicks. Do not pull the carbonation tube.
Insert the carbonating bottle neck into the Snap-Lock. Push the bottle up and back.
The Snap-Lock mechanism will catch the bottle and hold it in a vertical position.
When inserted correctly
there is a gap between the
bottom of the carbonating
bottle and the base. Do not
c a r b o n a t e i f t h e
carbonating bottle is resting
on the base or water will
splash out.