Advertisement
Alwaysfollowall safetyprecautionswhen
cleaningandservicingthe vacuum
cleaner.
WARNING
Electrical
Shock Or Personal Injury
Hazard
Disconnect
electrical
supply before
servicing
or cleaning
the unit.
Failure to do so could result in
electrical
shock or personal
injury
from cleaner suddenly
starting.
ii iiii i iiiii iiiii,
iiii
i
If the cleaner
does not seem to have ade-
quate suction, first check if the dust bag is
full or if a filter is Clogged. See DUST
BAG CHANGING
and FILTER CHANG-
ING.
If the bag and filter areas are free of
clogs, check the hose area. Remove
the
lower end of the stretch hose from the
cleaner
by grasping
the hose collar, twist-
ing, and pulling straight
out.
Plug in the
vacuum
and
turn it on.
Stretch
the
hose to
maximum
length and
then allow
the hose to
return to its
storage
length_
Hose In
and Out
Turn the unit
off and
unplug the
unit°
Visually
inspect
the hose and the base
area into which the hose is inserted.
Remove
any visible clog,
Re-insert
the hose into the opening
on
the lower body from which it was
removed° Press firmly to assure
connection
-Stretch
Hose
Hose
Collar
WARNING
Personal
Injury
Hazard
DO NOT place hands or feet
underneath
the unit at any time.
The agitator
will be revolving
rapidly
when the vacuum
is turned
on and is in the carpet setting.
iii
i
If the bag and filter areas and the hose
areas are free of clogs, check the nozzle
area. To check this area, see the section
on BELT CHANGING
AND AGITATOR
CLEANING,
Return the cleaner
to the upright
position
before plugging
into an electrical
outleL
19
Advertisement
