Prevent Monitor From Falling - Philips BDL5571V User Manual

User Manual BDL5571V

1.5.3 Prevent monitor from falling

To prevent the monitor from tipping in the event of an earthquake or other incident, please follow these steps.
As shown in the figure below, secure the monitor to a solid wall or pillar using a cord which is strong enough to
bear the weight of the monitor (BDL5571V: approx. 47.5 kg). Screw hooks (ring type) are recommended.
Screw Hook, etc.
Clamper
Screw
Screw Holes
Caution:
 Although the above method is recommended, it is not guaranteed that the monitor will not tilt over.
 Before moving the monitor, remove the cord first.
12