Using in PC monitor mode
Your TV can be used as a computer monitor.
You must first of all connect the computer and adjust the resolution (see p. 7).
Choosing PC mode
Press the
key on the remote control to switch the TV to PC mode.
PC
Press the
key to return to TV mode.
TV
If there is no PC signal for more than five seconds, the TV automatically goes into standby mode.
Using the PC menus
TV Menu
Picture
TV
Sound
PC
Features
HD
Install
π
Mode
PC mode
Picture π Brightness
Audio selection Contrast
Features Horizontal
Reset to Factory Vertical
Mode Colour Temp
Features
Phase
Clock
Format
PIP
Auto adjust
Press the
key to access the specific settings of the PC
MENU
monitor mode. Use the cursor keys to adjust them (the settings are
automatically saved).
Picture
•
Brightness/Contrast
•
Horizontal/Vertical
placing of the image.
•
: to adjust the colours (cold, normal or warm).
Colour Temp
Audio selection
To choose the sound reproduced on the TV (
Note:
- You must choose TV mode before going to TV/HD mode.
- To listen to the sound from a HD device in PC mode, take
care you also connected the audio cables to the HD device.
Features
•
Phase/Clock
: eliminates the horizontal (
(
) interfering lines.
Clock
•
: to choose between large screen (
Format
original (
) format of the PC screens.
Native
•
: change the Size and Position of the PIP window on the
PIP
screen when the
PIP
•
: position is set automatically.
Auto adjust
Reset to Factory
To return to the factory settings
Mode
To come back to TV/HD mode.
: to adjust the brightness and contrast.
: to adjust the horizontal and vertical
Phase
Fullscreen
key is used.
or
).
PC/HD
TV
) and vertical
) or the
13