Philips BDL5571V User Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Flat Panel TV
  5. BDL5571V
  6. User manual
Philips BDL5571V User Manual

Philips BDL5571V User Manual

Philips flat panel television user manual
Hide thumbs Also See for BDL5571V:
Table of Contents

Advertisement

Quick Links

BDL5571V
www.philips.com/welcome
User Manual (English)

Advertisement

Table of Contents
loading

Related Manuals for Philips BDL5571V

Summary of Contents for Philips BDL5571V

  • Page 1 BDL5571V www.philips.com/welcome User Manual (English)
  • Page 2 TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Socket-outlet shall be installed near the apparatus and shall be easily accessible. KNOW THESE SAFETY SYMBOLS User Manual BDL5571V...
  • Page 3 User Manual BDL5571V Read and follow these instructions when connecting and using your computer monitor: Unplug the monitor if you are not going to use it for an extensive period of time.  Unplug the monitor if you need to clean it with a slightly damp cloth. The screen many be ...
  • Page 4 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. User Manual BDL5571V...
  • Page 5 User Manual BDL5571V POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
  • Page 6 3. The BROWN wire must be connected to the terminal which marked with the letter “L” or coloured RED. Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the three wires. User Manual BDL5571V...
  • Page 7 Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury.

  • Page 8: Table Of Contents

    3.5. EXTERNAL AUDIO CONNECTION ... 25 3.5.1. CONNECTING EXTERNAL SPEAKERS... 25 3.5.2. CONNECTING EXTERNAL AUDIO DEVICE ... 27 3.6. CONNECTING ANOTHER BDL5571V MONITOR ... 28 4. OSD MENU ... 29 4.1. NAVIGATING THE OSD MENU ... 29 4.1.1. NAVIGATING THE OSD MENU USING THE REMOTE CONTROL... 29 4.1.2.
  • Page 9 User Manual BDL5571V 6.1. PIXELS AND SUB-PIXELS ... 51 6.2. TYPES OF PIXEL DEFECTS + DOT DEFINITION ... 51 6.3. BRIGHT DOT DEFECTS ... 52 6.4. DARK DOT DEFECTS ... 52 6.5. PROXIMITY OF PIXEL DEFECTS ... 52 6.6. PIXEL DEFECT TOLERANCES ... 52 7.

  • Page 10: Unpacking And Installation

     The product can normally operate only under 4000m altitude. It might abnormally function in locations over 4000m altitude and so do not install and operate there. China User Manual BDL5571V 1. LCD monitor 2. Remote control with batteries 3. CD-ROM 4. Quick Start Guide 5.

  • Page 11: Portrait Mounting

    How to use the Logo Guider for Portrait Mode? a. Before applying, make sure that the guider is in good condition. Fold the "PHILIPS" logo back in at the end of the guider. b. Peel off the back side of the protective film from the logo.

  • Page 12: Installing And Removing Stands

    1. Spread the protective sheet on a flat surface. 2. Place the monitor face-down on a protective sheet. 3. Remove screws using a screwdriver and place them in a safe place for reuse. Stands "Longer end comes to the front" User Manual BDL5571V Screw Screw...

  • Page 13: Prevent Monitor From Falling

    As shown in the figure below, secure the monitor to a solid wall or pillar using a cord which is strong enough to bear the weight of the monitor (BDL5571V: approx. 47.5 kg). Screw hooks (ring type) are recommended. Screw Hook, etc.

  • Page 14: Parts And Functions

    - lights amber when the monitor enters DPMS mode - When SCHEDULE is enabled, it would blink green and red - If the indicator blinks red, it tells that a failure is detected - Off when the main power of the monitor is turned off User Manual BDL5571V...

  • Page 15: Rear View

    User Manual BDL5571V 2.2. REAR VIEW POWER button ( To switch the power on or put the monitor to standby. MUTE button To switch the audio mute ON/OFF. SOURCE button To set the function while OSD menu is on or to activate input selection menu while OSD menu is off.

  • Page 16: Input/Output Terminals

    RS232C network connection input/output for the use of loop through function. AUDIO IN (AUDIO1/AUDIO2/ AUDIO3) Connect to the audio output of a computer or an AV device. AUDIO OUT R/L Outputs the audio signal from the AUDIO IN (AUDIO1/AUDIO2/AUDIO3) or HDMI jack. User Manual BDL5571V...
  • Page 17 Main power switch Press to switch the main power on/off. AC OUT Connect to the AC IN socket of another BDL5571V monitor or 100~240Vac, 50-60Hz, 3A Max.) 10. AC IN Connect the supplied power cord to the wall outlet. 11. DISPLAY PORT Connect to the DisplayPort output of a PC or an AV device.

  • Page 18: Remote Control

    Press to open the Contrast OSD selection, and then press the PLUS or MINUS button to adjust the value. BRIGHTNESS button Press to open the Brightness OSD selection, and then press the PLUS or MINUS button to adjust the value. User Manual BDL5571V...
  • Page 19 User Manual BDL5571V DISPLAY button To turn on/off the information OSD displayed on the upper right corner of the screen. MENU button To turn the OSD menu on/off. UP button  To move the highlight bar up to adjust the selected item when OSD menu is on.

  • Page 20: Inserting The Batteries In The Remote Control

    30 degrees. Note: The remote control may not function properly when the remote control sensor on the monitor is under direct sunlight or strong illumination, or when there is an obstacle in the path of signal transmission. User Manual BDL5571V...

  • Page 21: Connections To External Equipment

    User Manual BDL5571V 3. CONNECTIONS TO EXTERNAL EQUIPMENT 3.1. USING THE CABLE RETAINER 3.2. USING THE SWITCH COVER You can use the switch cover to prevent the monitor from being turned on or off accidentally.

  • Page 22: Connecting External Equipment (Dvd/Vcr/Vcd)

    User Manual BDL5571V 3.3. CONNECTING EXTERNAL EQUIPMENT (DVD/VCR/VCD) 3.3.1. USING COMPONENT VIDEO INPUT 1. Connect the green-colored (labeled as "Y") jack of the device to the green-colored "Y" jack of the monitor. 2. Connect the blue-colored (labeled as "Pb") jack of the device to the blue-colored "Pb" jack of the monitor.

  • Page 23: Using Displayport Input

    User Manual BDL5571V 3.3.3 USING DisplayPort INPUT Connect the DisplayPort connector of the external device to the DisplayPort input of the monitor. Allen: You might want to remove the audio connection from the drawing below because like HDMI cable, DP cable carries audio besides video.
  • Page 24 User Manual BDL5571V...

  • Page 25: Using Dvi Input

    User Manual BDL5571V 3.4.2. USING DVI INPUT 1. Connect the DVI-D connector of the PC to the DVI-D connector of the monitor. 2. Connect the audio cable to the AUDIO IN (AUDIO1) input of the monitor. 3.4.3. USING HDMI INPUT 1.

  • Page 26: Using Display Port Input

    User Manual BDL5571V 3.4.4. USING DISPLAY PORT INPUT 1. Connect the DisplayPort connector of the PC to the DisplayPort connector of the monitor. 2. Connect the audio cable to the AUDIO IN (AUDIO1) input of the monitor. Allen: You might want to remove the audio connection from the drawing because like HDMI cable, DP cable carries audio besides video.
  • Page 27 User Manual BDL5571V External speaker...

  • Page 28: Connecting External Audio Device

    User Manual BDL5571V 3.5.2. CONNECTING EXTERNAL AUDIO DEVICE Connect the red (R) and white (L) audio jacks of the external audio device to the AUDIO OUT R/L jacks of the monitor. External audio device...

  • Page 29: Connecting Another Bdl5571V Monitor

    Note: Maximum 9 displays that  Connect the DVI-D OUT connector of the BDL5571V monitor optional DVI  Connect the RS232C OUT connector of the monitor to the RS232C IN connector of another BDL5571V monitor.  Do not connect the AC OUT connector of the monitor to the AC IN connector of another BDL5571V monitor.

  • Page 30: Osd Menu

    PLUS/MINUS button to adjust settings. If there is a submenu, press the SET/PLUS button to enter the submenu. 5. Press the EXIT button on the remote control to return to the previous menu, or press the MENU button to exit the OSD menu. User Manual BDL5571V...

  • Page 31: Navigating The Osd Menu Using The Monitor's Control Buttons

    User Manual BDL5571V 4.1.2. NAVIGATING THE OSD MENU USING THE MONITOR‟S CONTROL BUTTONS 1. Press the MENU button to display the OSD menu. 2. Press the / button to choose the item you want to adjust. 3. Press the SOURCE or PLUS button to enter the submenu.

  • Page 32: Osd Menu Overview

    Adjust to remove the noise in the image. You can select a suitable noise reduction level. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between  Off  Low  Middle  High User Manual BDL5571V...
  • Page 33 User Manual BDL5571V Tint Note: For HDMI-Video timing, DVI-D(HD timing), DP(HD timing) and YPbPr inputs only. Adjust to change the color tint of the image. Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust.
  • Page 34 Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to make selection. Select Reset and press the SET button to restore settings to factory preset values. Press the EXIT button or select Cancel and press the SET button to cancel and then return to the previous menu. User Manual BDL5571V...

  • Page 35: Screen Menu

    User Manual BDL5571V 4.2.2. SCREEN MENU H position Adjust the horizontal placement of the picture. Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. Press the PLUS button to move the image to the right, or press the MINUS button to move the image to the left.
  • Page 36 Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to make selection. Select Reset and press the SET button to restore settings to factory preset values. Press the EXIT button or select Cancel and press the SET button to cancel and then return to the previous menu. User Manual BDL5571V...

  • Page 37: Audio Menu

    User Manual BDL5571V 4.2.3. AUDIO MENU Balance Adjust to emphasize left or right audio output balance. Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust. Treble Adjust to increase or decrease higher-pitched sounds.
  • Page 38 Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to make selection. Select Reset and press the SET button to restore settings to factory preset values. Press the EXIT button or select Cancel and press the SET button to cancel and then return to the previous menu. User Manual BDL5571V...

  • Page 39: Pip Menu

    User Manual BDL5571V 4.2.4. PIP MENU Turn PIP (Picture-in-Picture) mode On/Off. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between  On  Off PIP input Select the input signal for the sub-picture.
  • Page 40 ╳ ○ ○ ○ ╳ ╳ ╳ ○ ╳ ╳ ╳ ○ ╳ ╳ ╳ ○ ╳ ○ ○ ○ ╳ ○ ○ ○ User Manual BDL5571V YPbPr ╳ ╳ ○ ○ ○ ○ ○ ○ ╳ ╳ ╳ ╳...

  • Page 41: Configuration 1 Menu

    User Manual BDL5571V 4.2.5. CONFIGURATION 1 MENU Auto adjust Note: For the VGA input only. Use this function to let the monitor automatically optimize the display of VGA input image. Press the SET/PLUS button to open the submenu, and then press the SET button to adjust.
  • Page 42 PLUS/MINUS button to make selection. Select Reset and press the SET button to restore settings to factory preset values. Press the EXIT button or select Cancel and press the SET button to cancel and then return to the previous menu. User Manual BDL5571V...

  • Page 43: Configuration 2 Menu

    User Manual BDL5571V 4.2.6. CONFIGURATION 2 MENU OSD turn off Set the period of time the OSD menu stays on the screen. (from 5 to 120 seconds) Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to adjust.

  • Page 44: Advanced Option Menu

    Select a display gamma value to best suit the image and optimize image brightness and contrast. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to togglebetween  Native  2.2  2.4  S gamma User Manual BDL5571V...
  • Page 45  Off - Disable the film mode frame conversion function. This mode is suitable for TV broadcasting and VCR signals. IR control Select the operation mode of the remote control when multiple BDL5571V monitors are connected via the RS232C connection. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between ...
  • Page 46  Unlock - Enable the keyboard. Tiling With this function you can create a single large screen matrix (display wall) that consists of up to 25 BDL5571V monitors (5 monitors each on the vertical and horizontal sides). each BDL5571V monitor in a daisy-chain configuration. Example:...
  • Page 47 User Manual BDL5571V Heat status This function allows you to check the thermal status of the monitor at any time. The accuracy of the temperature indicated is 5 degrees. Press the SET/PLUS button to view the heat status. Press the EXIT button to return to the previous menu.
  • Page 48 Set the ID number for controlling the monitor via the RS232C connection. Each monitor must have an unique ID number when multiple BDL5571V monitors are connected. Press the SET/PLUS button to open the submenu, and then press the PLUS/MINUS button to select a monitor ID.
  • Page 49 User Manual BDL5571V Setting cloning To store OSD setting of one display into the USB drive and clone the setting to another display. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between ...

  • Page 50: Input Mode

    Ratio 74.25 MHz 16:9 Normally DVB Mode 74.25 MHz 16:9 Normally ATSC Mode 148.5 MHz 16:9 Normally ATSC Mode User Manual BDL5571V Stand for Mode Array Super VGA Wide XGA Wide XGA Super XGA Super XGA Wide XGA Wide XGA...
  • Page 51 User Manual BDL5571V that the PC is connected.  When horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable connections.  The display settings table complies to the IBM/VESA standards, and based on the analog input.

  • Page 52: Pixel Defect Policy

    / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any Plasma- & LCD- displays with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions.

  • Page 53: Bright Dot Defects

    6.6. PIXEL DEFECT TOLERANCES In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a Philips Plasma / LCD- display must have pixel or sub-pixel defects exceeding the tolerances listed in the following table.

  • Page 54: Cleaning And Troubleshooting

     Do not scratch or hit the cabinet with fingers or hard objects of any kind.  Do not use volatile substances such as insert sprays, solvents and thinners on the cabinet.  Do not place anything made from rubber or PVC near the cabinet for any extended periods of time. User Manual BDL5571V...

  • Page 55: Troubleshooting

    User Manual BDL5571V 7.2. TROUBLESHOOTING Symptom No picture is displayed 1. The power cord is disconnected. 2. The main power switch on the back of the monitor is not switched on. 3. The selected input has no connection. 4. The monitor is in standby mode.

  • Page 56: Technical Specifications

    Analog RGB: 0.7V [p-p] (75Ω), H/CS/V: TTL (2.2kΩ), SOG: 1V [p-p] (75Ω) MAX: 720p, 1080p, 1920 x 1080/60 Hz (WUXGA) Y: 1V [p-p] (75Ω), Pb: 0.7V [p-p] (75Ω), Pr: 0.7V [p-p] (75Ω) MAX: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p User Manual BDL5571V...
  • Page 57 Output Sound Pressure Frequency Response Your BDL5571V supports HDMI CEC (Consumer Electronics Control) protocol through the OneWire function. This gives you the ability to control your display through the HDMI connector using CEC commands. The command manual for this function is available separately.
  • Page 58 2010 © Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trade marks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.

This manual is also suitable for:

Bdl5571v/00

Table of Contents