Philips BDH4222V User Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Flat Panel TV
  5. BDH4222V
  6. User manual

Philips BDH4222V User Manual

Philips flat tv data specification
Hide thumbs Also See for BDH4222V:
Table of Contents

Advertisement

Quick Links

Download this manual
Philips
Business
Solutions
User Manual
EN
TYPE Nr.
BDH4222V
BDH4223V

Advertisement

Table of Contents
loading

Related Manuals for Philips BDH4222V

Summary of Contents for Philips BDH4222V

  • Page 1 Philips Business Solutions User Manual TYPE Nr. BDH4222V BDH4223V...

  • Page 3: Table Of Contents

    Mounting Materials ..............52 User Manual BDH4222V/BDH4223V...
  • Page 4 User Manual BDH4222V/BDH4223V CLEANING AND TROUBLESHOOTING ........53 11.1...

  • Page 5: Important Notes And Safety Instructions

    1. IMPORTANT NOTES AND SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS ■ Read and keep these instructions. ■ Heed all warnings. ■ Follow all instructions. ■ Do not use this apparatus near water. ■ Disconnect from the electric outlet before cleaning. Do not use liquid or aerosol cleaners.
  • Page 6 ■ Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. ■ Unplug this apparatus during lightning storms or when unused for long periods of time.

  • Page 7: Warnings And Precautions

    ■ Outdoor Antenna Grounding: If an outside antenna is connected to the receiver, be sure the ● antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code, ANSI/NFPA ●...

  • Page 8: Cleaning & Care

    END-OF-LIFE DISPOSAL ■ This Philips product and its packaging contain materials that can be recycled and re-used. Specialized companies can recycle your product to increase the amount of reusable materials and minimize the amounts which need to be properly disposed.

  • Page 9: Regulatory Notice

    User Manual BDV4222V/BDH4223V 2. REGULATORY NOTICE FCC Statement The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 10 User Manual BDV4222V/BDH4223V...

  • Page 11: Product Features

    User Manual BDH4222V/4223V 3. PRODUCT FEATURES Quiet Fanless Operation This plasma display is built without any fans for quiet operations suitable for home theater related applications. Advanced Digital Image Processing Advanced digital processor with adaptive motion de-interlacing converts all 15KHz signals into progressive scan for a brighter, flicker free image.
  • Page 12 User Manual BDH4222V/4223V DVI Digital Video Interface with HDCP(High-Bandwidth Digital Content Protection) Standard DVI interface supports the latest in digital video preipherals equipped with DVI v HDCP digital video output(s). This means that digital content can now pass from sources such as set-top-box, directly to this display without digital-to analog conversion that erodes video quality.

  • Page 13: Unpacking And Installation

    4. UNPACKING AND INSTALLATION UNPACKING ■ The monitor is packed in a carton, together with the standard accessories. Any other optional accessories will be packed separately. ■ The weight of the monitor is approx 36kg. Due to the size and weight it is recommended to move it by 2 people.

  • Page 14: Installation Notes

    INSTALLATION NOTES ■ Due to the high power consumption, always use the plug exclusively designed for this product. If an extended line is required, please consult your service agent. ■ The product should be installed on a flat surface to avoid tipping.The distance between the back of the product and the wall should be maintained for proper ventilation.

  • Page 15: Parts & Functions

    5. PARTS & FUNCTIONS FRONT VIEW 1. Status LED Not Illumated = No AC Power detected ● If the main power switch (rear of panel) is turned off, this LED will not illuminate. Orange = Standby (Power OFF) with AC power ●...

  • Page 16: Rear View

    User Manual BDH4222V/4223V REAR VIEW MAIN POWER...

  • Page 17: Remote Control

    1 1 3 1 1 4 1 1 5 1 1 7 REMOTE CONTROL 1. Standby Power On/Off 1 1 1 Push this button to turn on the monitor from Standby mode. Push it again to turn it off to Standby mode. 2.
  • Page 18 14. Closed Captioning Turns on Closed Captioning Mode. 15. V-Chip NOT SUPPORTED. 16. SURROUND 17. WIDE Toggles between various aspect ratio settings. (See page 34) 18. Discrete Power ON/OFF Press OFF to send monitor into standby mode. Press ON to power on from standby mode.
  • Page 19 5. PARTS & FUNCTIONS FRONT VIEW 1. Status LED Not Illumated = No AC Power detected ● If the main power switch (rear of panel) is turned off, this LED will not illuminate. Orange = Standby (Power OFF) with AC power ●...
  • Page 20 User Manual BDH4222V/4223V REAR VIEW MAIN POWER...
  • Page 21 1 1 3 1 1 4 1 1 5 1 1 7 REMOTE CONTROL 1. Standby Power On/Off 1 1 1 Push this button to turn on the monitor from Standby mode. Push it again to turn it off to Standby mode. 2.
  • Page 22 14. Closed Captioning Turns on Closed Captioning Mode. 15. V-Chip NOT SUPPORTED. 16. SURROUND 17. WIDE Toggles between various aspect ratio settings. (See page 34) 18. Discrete Power ON/OFF Press OFF to send monitor into standby mode. Press ON to power on from standby mode.

  • Page 23: Connections To External Equipment

    6. CONNECTIONS TO EXTERNAL EQUIPMENT CONNECTING A DVD PLAYER Using Component Video Input 1 Connect the green-colored (labeled as "Y") jack of the DVD to the green-colored "Y1" jack of the monitor. 2 Connect the red-colored (labeled as "PR" or "CR") jack of the DVD to the red-colored "PR1/CR1"...

  • Page 24: Connecting A Hdtv Decoder Set-Top Box

    CONNECTING A HDTV DECODER SET-TOP Using Component Video Input 1 Connect the green (labeled as "Y") jack of the HDTV Set-top box to the green "Y1" jack of the monitor. 2 Connect the red (labeled as "PR" or "CR") jack of the HDTV Set-top box to the red "PR1/CR1"...

  • Page 25: Connecting A Vcr

    CONNECTING A VCR Using S-Video Input 1 Connect the S-Video (4-pin DIN) connector of the VCR to the "S-VIDEO" input of the monitor. 2 Connect the red (R) and white (L) audio jacks of the VCR to the R and L audio-in jacks located next to the S-VIDEO connector. Using Composite Input 1 Connect the "yellow"...

  • Page 26: External Audio Connection

    EXTERNAL AUDIO CONNECTION Connecting External Amplified Speakers This monitor can be connected to an external set of amplified speakers using the AUDIO OUT jacks located on the back of the monitor. In addition, this monitor is equipped with a small 3.5 mm phono style plug for remote turn-on applications that will automatically send a remote turn-on/off signal to the external amplified speakers.

  • Page 27: Connecting A Pc

    CONNECTING A PC Using RGB or DVI Video Input 1 For most PC's, connect the 15-pin D-Sub RGB connector of the PC to the RGB-IN connector of the monitor. If you have a PC that is equipped with a DVI (Digital Visual Interface), you may connect the PC DVI connector from the PC to the DVI-In connector of the monitor.

  • Page 28: Rs-232 Remote Control Connections

    RS-232 REMOTE CONTROL CONNECTIONS RS-232 Serial Terminal Overview This monitor is equipped with an RS-232 serial terminal for using the monitor with computer controls. The RS-232 serial terminal conforms to the RS-232C interface specification. The computer requires a software application (such as programming language software) which allows the computer to send and receive control data that supports the communications parameters listed below.
  • Page 29 ■ If multiple commands are transmitted, make sure to wait for the response signals of the monitor before sending the next command. The following are response command signals: Response Error 80 70 MODE ERROR 80 71 ITEM ERROR 80 72 FORMAT ERROR Command Parameters These remote control commands are available to send to the monitor...
  • Page 30 User Manual BDH4222V/BDH4223V...

  • Page 31: Basic Functions

    7. BASIC FUNCTIONS POWERING ON / OFF Make sure the monitor is plugged into the wall outlet and the main AC switch located in the rear of the monitor is switched to ON position. If the power is plugged in and the AC switch is on, the STATUS LED will illuminate in orange color.

  • Page 32: Selecting Signal Source

    SELECTING SIGNAL SOURCE Using Front Panel or Remote Control 1 Press the INPUT key on the front panel of the monitor, or press the INPUT key on the remote control. Pressing the INPUT key will cycle the monitor thru all available ●...

  • Page 33: Understanding Hdtv

    UNDERSTANDING HDTV What is Digital Television or DTV? Digital TVs are televisions that can receive and display digital television broadcasts sent using any one of three following categories: HDTV (High Definition TV), EDTV (Enhanced Digital TV), and SDTV (Standard Definition TV). What is the Difference Between HDTV, EDTV, and SDTV? HDTV, EDTV, and SDTV are three grades of televison or monitors.
  • Page 34 User Manual BDH4222V/4223V How is a HDTV/EDTV/SDTV Different from a HDTV/ EDTV/SDTV Monitor? In order to receive digital broadcasts, a digital "receiver" or "decoder" must be used to receive and decode digital broadcast signals. Digital decoders can be built into the monitor itself or they may come in the form of a set-top box that is added separately to the monitor.

  • Page 35: Advanced Functions

    8. ADVANCED FUNCTIONS PICTURE-IN-PICTURE (PIP) / SIDE-BY-SIDE PICTURE (POP) Turn On PIP or POP Mode 1 Press the PIP key once on the remote control to activate in PIP mode. 2 Press the PIP again to switch to POP mode. 3 Press the PIP key sequentially will cycle between: In PIP mode, a small window is displayed in one of the four corners.
  • Page 36 Changing the Input Source for Main Picture 1 Press the INPUT key or any of the DIRECT INPUT KEYS to change. Notes: ● PIP mode can only be turned on if the monitor’s input is set to: AV1, AV2 (S-Video), Component 1 and 2. If the monitor’s main input is set to RGB or DVI, the PIP and POP will not function.
  • Page 37 POP options: ■ POP On/Off ■ Input Source Selection ■ Screen Rate (Aspect Ratio Control) When POP (Side-by-side) picture is turned on, you can change the aspect ratio for the image displayed: Choose FULL to show a full screen image. The displayed image ●...

  • Page 38: Widescreen (16:9 Aspect Ratio) Viewing Modes

    WIDESCREEN (16:9 ASPECT RATIO) VIEWING MODES Understanding Widescreen Modes This plasma monitor is capable of displaying a widescreen image on the native 16:9 aspect ratio screen. However, not all available broadcast or video content fits perfectly in a widescreen (16:9) format resulting in unused screen space.
  • Page 39 NORMAL NOISE REDUCTION Notes: ● 4:3 and Panorama modes are not available when zoom mode is activated. ● When using Component 1 and Component 2 inputs to display 576p, 1080i or 720p, Panorama mode is not available. ● When using RGB or DVI inputs, only 4:3 and 16:9 modes are available.

  • Page 40: On-Screen Display (Osd) Settings

    BURN-IN RECOVERY PIXEL SHIFT H4222_0316 ON-SCREEN DISPLAY (OSD) SETTINGS Accessing OSD Settings Menu You can set various OSD display settings from the OSD menu. 1 Press the MENU +/- keys on the remote or the front control panel. 2 Use the ADJ +/- keys to navigate to “OTHER” OSD sub-menu as displayed below.

  • Page 41: Sleep Timer Settings

    BURN-IN RECOVERY PIXEL SHIFT H4222_0316 SLEEP TIMER SETTINGS Setting Sleep Timer Using OSD To set the sleep timer using the OSD screen: 1 Press the MENU +/- keys on the remote or the front control panel. 2 Use the ADJ +/- keys to navigate to “OTHER” OSD sub-menu as displayed below.

  • Page 42: Variable And Fixed Audio Output

    VARIABLE AND FIXED AUDIO OUTPUT Setting Output Using OSD You can set the type of output this monitor outputs from its audio output jack located in the rear of the monitor. By using an OSD based switch, you can easily choose between variable or fixed audio outputs. To set the audio output setting: 1 Press the MENU +/- keys on the remote control or the front control panel of the display.

  • Page 43: Sound Adjustments

    SOUND ADJUSTMENTS Sound Adjustments Using OSD Sound adjustments are available to enhance the sound performance of the monitor. These adjustments will affect the monitor’s built-in speakers and the AUDIO OUTPUT jacks when set to “Variable”. To access sound adjustments: 1 Press the MENU +/- keys on the remote or the front control panel. 2 Use the ADJ +/- keys to navigate to “SOUND”...

  • Page 44: Signal Frequency Information Display

    BURN-IN RECOVERY PIXEL SHIFT H4222_0316 SIGNAL FREQUENCY INFORMATION DISPLAY Displaying Frequency of Signal This plasma monitor is capable of displaying the frequency level of the signal being displayed. To see signal frequency information: 1 Press the MENU +/- keys on the remote or the front control panel. 2 Use the ADJ +/- keys to navigate to the “OTHER”...

  • Page 45: Picture Adjusting

    NORMAL NOISE REDUCTION PICTURE ADJUSTING 8.8.1 FOR AV Accessing Picture Adjustment Mode Various picture adjustments can be set using the Picture Adjustment OSD menu. To access the OSD menu: 1 Press the MENU +/- keys on the remote or the front control panel. 2 The first menu displayed is the PICTURE menu.
  • Page 46 User Manual BDH4222V/4223V Table below shows an explanation of the picture adjustments available for AV: CONTRAST Increases or decreases the level of white in the video picture. Increasing contrast will make white areas of the video picture brighter. Contrast works in conjuction with Brightness.

  • Page 47: For Component Video

    NOISE REDUCTION Table below shows an explanation of the picture adjustments available for Component Video: CONTRAST Increases or decreases the level of white in the video picture. Increasing contrast will make white areas of the video picture brighter. Contrast works in conjuction with Brightness. BRIGHT Enhances the level of dark areas in the video picture such as night scenes and shadow scenes.
  • Page 48 SCREEN WIDTH Selects the various screen width modes. See page 34 for more information. NOISE REDUCTION Adjusts the Noice level. There are four settings to choose: OFF; lOW; MEDIUM;HIGH GEOMETRIC ADJUST Opens the Geometric Adjust sub-menu. NOISE REDUCTION Table below shows an explanation of the available geometric adjustments: V-SIZE Changes the vertical size of the picture.

  • Page 49: For Rgb / Dvi

    COLOR TEMPERATURE V-SIZE V-CENTER H-WIDTH H-POSITION Table below shows an explanation of the picture adjustments available for RGB/DVI: CONTRAST Increases or decreases the level of white in the video picture. Increasing contrast will make white areas of the video picture brighter. Contrast works in conjuction with Brightness. BRIGHT Enhances the level of dark areas in the video picture such as night scenes and shadow scenes.
  • Page 50 User Manual BDH4222V/4223V V-CENTER Changes the vertical position of the picture. Increase to shift the picture up. Decrease to shift the picture down . H-WIDTH Changes the horizontal size of the picture. Increase to enlarge the picture size in the horizontal direction.

  • Page 51: Optional Accessories

    9. OPTIONAL ACCESSORIES The following accessories are available and may be purchased from your local sales representative: ■ Wall Mount ■ Composite Video Cable (RCA) ■ S-Video Cable (Mini-DIN) ■ Component Video Cable (RCA to RCA) ■ Audio Cable (RCA Cable) ■...
  • Page 52 User Manual BDH4222V/4223V...

  • Page 53: Technical Specifications

    10. TECHNICAL SPECIFICATIONS 10.1 SPECIFICATIONS Display Panel Screen Size 42" Aspect Ratio 16:9 Number of Pixels 1024 (Horizontal, RGB Trio) x 1024 (Vertical) Pixel Pitch 0.90 x 0.90 mm Luminance 1100 cd/m , at 1% white window pattern Power Source Input Voltage 100 ~ 240 Vac;...
  • Page 54 DVI Signal Type Digital Polarity Positive or Negative Frequency H: support to 31k ~ 63 kHz V: support to 50 ~ 85 Hz Audio Signal Analog 500 mV Pin Assignments for Sub-D Connector (In/ Loop Out) 1 - RED 6 - RED GND 2 - GREEN 7 - GREEN GND 3 - BLUE...
  • Page 55 for Component 1 and 2 Mode Resolution 640x480p 1920x1080i 1280x720p 720x576p 1920x1080i 1280x720p Max. Resolution Up to 1280x1024 Dimensions & Weight With Stand Without Speakers Width 1081 mm Height 722 mm Depth 220 mm Weight 80.5 lbs/ 36.5 kg Operating Conditions Temperature Relative Humidity Pressure...

  • Page 56: Mounting Materials

    This Plasma monitor is Energy Star compliant when used with a computer equipped with DPMS. 10.2 MOUNTING MATERIALS (Fixed and Flexible Wall Mounts, Ceiling Mounts, etc.) Notes: ● Follow mount bracket instruction included in mounting kit ● This type of equipment is to be installed by qualified installers; please contact with authorized dealer for installation.

  • Page 57: Cleaning And Troubleshooting

    11. CLEANING AND TROUBLESHOOTING 11.1 CLEANING Cautions When Using the Plasma Monitor ■ Do not bring your hands, face or objects close to the ventilation holes of the plasma monitor. Top of plasma monitor is usually very hot due to the high temperature of exhaust air being released through the ventilation holes.

  • Page 58: Troubleshooting

    Symptom Possible Cause No picture is displayed 1 The power cord is disconnected. 2 The main power switch on the back of the monitor is not switched on. 3 The selected input has no connection. 4 The monitor is in standby mode in RGB mode.

  • Page 59: Limited Warranty (Eur)

    ■ product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics Europe. ■ reception problems caused by signal conditions or cable or antenna systems outside the unit.
  • Page 60 Philips Consumers Electronics Europe. In countries where Philips Consumers Electronics Europe does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
  • Page 61 User Manual BDH4222V/4223V REMEMBER ... Please record the model and serial numbers found on the product below. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary. MODEL # _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _...
  • Page 62 User Manual BDH4222V/4223V...

  • Page 63: Limited Warranty (Usa)

    ■ product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics North America. ■ reception problems caused by signal conditions or cable or antenna systems outside the unit.
  • Page 64 Philips Consumers Electronics North America. In countries where Philips Consumers Electronics North America does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).

This manual is also suitable for:

Bdh4222v/00Bdh4222v/22Bdh4223v/27Bdh4223v42-wxga plasma monitor bdh4223v-27b

Table of Contents