Seat Height Adjustment; Handle Adjustment - Volaris S7 SMART User Manual

Seat height adjustment

Adjust one side at a time.
Pull out the knob under the seat (a). At the same time, raise
or lower the seat to the position required. Release the knob
ensuring that it locks into place properly to secure the seat
in place. Do the same with the other side. Ensure that the
seat is level before using the rollator. Press down the centre
section of the seat (b).
Handle height adjustment
Adjust the height of the handles by pulling out the knob (c)
and adjusting the height; see the setting heights on page 2.
Make sure the parking brake handles are folded up (d), then
adjust the height and check that the knob (c) clicks back into
place. After adjustment, check that the brakes are working
(e) before using the rollator! Stand upright next to your S7
SMART. The handles are set at the correct height when your
hands are level with them. When you have used your
rollator for a while, you will feel whether or not you need to
reset them. You should feel comfortable when you are
walking with your rollator.
x2
x2
e
b
d
a
c
4