Cable Lubrication; Fault Tracing - Volaris S7 SMART User Manual

Cable lubrication

1. After washing the
rollator, lubricate the
cables underneath
the frame. Pull up
each brake lever and
apply a few drops of
oil to the cables.
2. Lubricate the cables
in the springs on the rear wheels also.

Fault tracing

If, when you are walking with
S7 SMART, it pulls to one side,
check that the wheels rotate
equally easily and that the forks
swing easily. Check that the
wheels and the forks are
properly secured. Check that no dirt or debris is caught
between a wheel and its brake shoe.
If a brake doesn't work or the brakes work unevenly, check
that the adjustment knobs, after adjusting the height of the
handles, have clicked back into place, see page 4. Make sure
the brake cables are secure in the brake arms under the
frame. Check that the brake arm springs on the rear wheels
are whole. When braking, check that the brake shoes are
applied to the wheels with equal force. Cable adjustment.
(See page 7).
11